Next: System-specific Predefined Macros, Previous: Standard Predefined Macros, Up: Predefined Macros [Contents][Index]
The common predefined macros are GNU C extensions. They are available with the same meanings regardless of the machine or operating system on which you are using GNU C or GNU Fortran. Their names all start with double underscores.
__COUNTER__This macro expands to sequential integral values starting from 0. In
conjunction with the ## operator, this provides a convenient means to
generate unique identifiers. Care must be taken to ensure that
__COUNTER__ is not expanded prior to inclusion of precompiled headers
which use it. Otherwise, the precompiled headers will not be used.
__GFORTRAN__The GNU Fortran compiler defines this.
__GNUC____GNUC_MINOR____GNUC_PATCHLEVEL__These macros are defined by all GNU compilers that use the C
preprocessor: C, C++, Objective-C and Fortran. Their values are the major
version, minor version, and patch level of the compiler, as integer
constants. For example, GCC version x.y.z
defines __GNUC__ to x, __GNUC_MINOR__ to y,
and __GNUC_PATCHLEVEL__ to z. These
macros are also defined if you invoke the preprocessor directly.
If all you need to know is whether or not your program is being compiled
by GCC, or a non-GCC compiler that claims to accept the GNU C dialects,
you can simply test __GNUC__. If you need to write code
which depends on a specific version, you must be more careful. Each
time the minor version is increased, the patch level is reset to zero;
each time the major version is increased, the
minor version and patch level are reset. If you wish to use the
predefined macros directly in the conditional, you will need to write it
like this:
/* Test for GCC > 3.2.0 */
#if __GNUC__ > 3 || \
(__GNUC__ == 3 && (__GNUC_MINOR__ > 2 || \
(__GNUC_MINOR__ == 2 && \
__GNUC_PATCHLEVEL__ > 0))
Another approach is to use the predefined macros to calculate a single number, then compare that against a threshold:
#define GCC_VERSION (__GNUC__ * 10000 \
+ __GNUC_MINOR__ * 100 \
+ __GNUC_PATCHLEVEL__)
…
/* Test for GCC > 3.2.0 */
#if GCC_VERSION > 30200
Many people find this form easier to understand.
__GNUG__The GNU C++ compiler defines this. Testing it is equivalent to
testing (__GNUC__ && __cplusplus).
__STRICT_ANSI__GCC defines this macro if and only if the -ansi switch, or a -std switch specifying strict conformance to some version of ISO C or ISO C++, was specified when GCC was invoked. It is defined to ‘1’. This macro exists primarily to direct GNU libc’s header files to use only definitions found in standard C.
__BASE_FILE__This macro expands to the name of the main input file, in the form of a C string constant. This is the source file that was specified on the command line of the preprocessor or C compiler.
__INCLUDE_LEVEL__This macro expands to a decimal integer constant that represents the depth of nesting in include files. The value of this macro is incremented on every ‘#include’ directive and decremented at the end of every included file. It starts out at 0, its value within the base file specified on the command line.
__ELF__This macro is defined if the target uses the ELF object format.
__VERSION__This macro expands to a string constant which describes the version of the compiler in use. You should not rely on its contents having any particular form, but it can be counted on to contain at least the release number.
__OPTIMIZE____OPTIMIZE_SIZE____NO_INLINE__These macros describe the compilation mode. __OPTIMIZE__ is
defined in all optimizing compilations. __OPTIMIZE_SIZE__ is
defined if the compiler is optimizing for size, not speed.
__NO_INLINE__ is defined if no functions will be inlined into
their callers (when not optimizing, or when inlining has been
specifically disabled by -fno-inline).
These macros cause certain GNU header files to provide optimized definitions, using macros or inline functions, of system library functions. You should not use these macros in any way unless you make sure that programs will execute with the same effect whether or not they are defined. If they are defined, their value is 1.
__GNUC_GNU_INLINE__GCC defines this macro if functions declared inline will be
handled in GCC’s traditional gnu90 mode. Object files will contain
externally visible definitions of all functions declared inline
without extern or static. They will not contain any
definitions of any functions declared extern inline.
__GNUC_STDC_INLINE__GCC defines this macro if functions declared inline will be
handled according to the ISO C99 or later standards. Object files will contain
externally visible definitions of all functions declared extern
inline. They will not contain definitions of any functions declared
inline without extern.
If this macro is defined, GCC supports the gnu_inline function
attribute as a way to always get the gnu90 behavior.
__CHAR_UNSIGNED__GCC defines this macro if and only if the data type char is
unsigned on the target machine. It exists to cause the standard header
file limits.h to work correctly. You should not use this macro
yourself; instead, refer to the standard macros defined in limits.h.
__WCHAR_UNSIGNED__Like __CHAR_UNSIGNED__, this macro is defined if and only if the
data type wchar_t is unsigned and the front-end is in C++ mode.
__REGISTER_PREFIX__This macro expands to a single token (not a string constant) which is
the prefix applied to CPU register names in assembly language for this
target. You can use it to write assembly that is usable in multiple
environments. For example, in the m68k-aout environment it
expands to nothing, but in the m68k-coff environment it expands
to a single ‘%’.
__USER_LABEL_PREFIX__This macro expands to a single token which is the prefix applied to
user labels (symbols visible to C code) in assembly. For example, in
the m68k-aout environment it expands to an ‘_’, but in the
m68k-coff environment it expands to nothing.
This macro will have the correct definition even if -f(no-)underscores is in use, but it will not be correct if target-specific options that adjust this prefix are used (e.g. the OSF/rose -mno-underscores option).
__SIZE_TYPE____PTRDIFF_TYPE____WCHAR_TYPE____WINT_TYPE____INTMAX_TYPE____UINTMAX_TYPE____SIG_ATOMIC_TYPE____INT8_TYPE____INT16_TYPE____INT32_TYPE____INT64_TYPE____UINT8_TYPE____UINT16_TYPE____UINT32_TYPE____UINT64_TYPE____INT_LEAST8_TYPE____INT_LEAST16_TYPE____INT_LEAST32_TYPE____INT_LEAST64_TYPE____UINT_LEAST8_TYPE____UINT_LEAST16_TYPE____UINT_LEAST32_TYPE____UINT_LEAST64_TYPE____INT_FAST8_TYPE____INT_FAST16_TYPE____INT_FAST32_TYPE____INT_FAST64_TYPE____UINT_FAST8_TYPE____UINT_FAST16_TYPE____UINT_FAST32_TYPE____UINT_FAST64_TYPE____INTPTR_TYPE____UINTPTR_TYPE__These macros are defined to the correct underlying types for the
size_t, ptrdiff_t, wchar_t, wint_t,
intmax_t, uintmax_t, sig_atomic_t, int8_t,
int16_t, int32_t, int64_t, uint8_t,
uint16_t, uint32_t, uint64_t,
int_least8_t, int_least16_t, int_least32_t,
int_least64_t, uint_least8_t, uint_least16_t,
uint_least32_t, uint_least64_t, int_fast8_t,
int_fast16_t, int_fast32_t, int_fast64_t,
uint_fast8_t, uint_fast16_t, uint_fast32_t,
uint_fast64_t, intptr_t, and uintptr_t typedefs,
respectively. They exist to make the standard header files
stddef.h, stdint.h, and wchar.h work correctly.
You should not use these macros directly; instead, include the
appropriate headers and use the typedefs. Some of these macros may
not be defined on particular systems if GCC does not provide a
stdint.h header on those systems.
__CHAR_BIT__Defined to the number of bits used in the representation of the
char data type. It exists to make the standard header given
numerical limits work correctly. You should not use
this macro directly; instead, include the appropriate headers.
__SCHAR_MAX____WCHAR_MAX____SHRT_MAX____INT_MAX____LONG_MAX____LONG_LONG_MAX____WINT_MAX____SIZE_MAX____PTRDIFF_MAX____INTMAX_MAX____UINTMAX_MAX____SIG_ATOMIC_MAX____INT8_MAX____INT16_MAX____INT32_MAX____INT64_MAX____UINT8_MAX____UINT16_MAX____UINT32_MAX____UINT64_MAX____INT_LEAST8_MAX____INT_LEAST16_MAX____INT_LEAST32_MAX____INT_LEAST64_MAX____UINT_LEAST8_MAX____UINT_LEAST16_MAX____UINT_LEAST32_MAX____UINT_LEAST64_MAX____INT_FAST8_MAX____INT_FAST16_MAX____INT_FAST32_MAX____INT_FAST64_MAX____UINT_FAST8_MAX____UINT_FAST16_MAX____UINT_FAST32_MAX____UINT_FAST64_MAX____INTPTR_MAX____UINTPTR_MAX____WCHAR_MIN____WINT_MIN____SIG_ATOMIC_MIN__Defined to the maximum value of the signed char, wchar_t,
signed short,
signed int, signed long, signed long long,
wint_t, size_t, ptrdiff_t,
intmax_t, uintmax_t, sig_atomic_t, int8_t,
int16_t, int32_t, int64_t, uint8_t,
uint16_t, uint32_t, uint64_t,
int_least8_t, int_least16_t, int_least32_t,
int_least64_t, uint_least8_t, uint_least16_t,
uint_least32_t, uint_least64_t, int_fast8_t,
int_fast16_t, int_fast32_t, int_fast64_t,
uint_fast8_t, uint_fast16_t, uint_fast32_t,
uint_fast64_t, intptr_t, and uintptr_t types and
to the minimum value of the wchar_t, wint_t, and
sig_atomic_t types respectively. They exist to make the
standard header given numerical limits work correctly. You should not
use these macros directly; instead, include the appropriate headers.
Some of these macros may not be defined on particular systems if GCC
does not provide a stdint.h header on those systems.
__INT8_C__INT16_C__INT32_C__INT64_C__UINT8_C__UINT16_C__UINT32_C__UINT64_C__INTMAX_C__UINTMAX_CDefined to implementations of the standard stdint.h macros with
the same names without the leading __. They exist the make the
implementation of that header work correctly. You should not use
these macros directly; instead, include the appropriate headers. Some
of these macros may not be defined on particular systems if GCC does
not provide a stdint.h header on those systems.
__SCHAR_WIDTH____SHRT_WIDTH____INT_WIDTH____LONG_WIDTH____LONG_LONG_WIDTH____PTRDIFF_WIDTH____SIG_ATOMIC_WIDTH____SIZE_WIDTH____WCHAR_WIDTH____WINT_WIDTH____INT_LEAST8_WIDTH____INT_LEAST16_WIDTH____INT_LEAST32_WIDTH____INT_LEAST64_WIDTH____INT_FAST8_WIDTH____INT_FAST16_WIDTH____INT_FAST32_WIDTH____INT_FAST64_WIDTH____INTPTR_WIDTH____INTMAX_WIDTH__Defined to the bit widths of the corresponding types. They exist to make the implementations of limits.h and stdint.h behave correctly. You should not use these macros directly; instead, include the appropriate headers. Some of these macros may not be defined on particular systems if GCC does not provide a stdint.h header on those systems.
__SIZEOF_INT____SIZEOF_LONG____SIZEOF_LONG_LONG____SIZEOF_SHORT____SIZEOF_POINTER____SIZEOF_FLOAT____SIZEOF_DOUBLE____SIZEOF_LONG_DOUBLE____SIZEOF_SIZE_T____SIZEOF_WCHAR_T____SIZEOF_WINT_T____SIZEOF_PTRDIFF_T__Defined to the number of bytes of the C standard data types: int,
long, long long, short, void *, float,
double, long double, size_t, wchar_t, wint_t
and ptrdiff_t.
__BYTE_ORDER____ORDER_LITTLE_ENDIAN____ORDER_BIG_ENDIAN____ORDER_PDP_ENDIAN____BYTE_ORDER__ is defined to one of the values
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__, or
__ORDER_PDP_ENDIAN__ to reflect the layout of multi-byte and
multi-word quantities in memory. If __BYTE_ORDER__ is equal to
__ORDER_LITTLE_ENDIAN__ or __ORDER_BIG_ENDIAN__, then
multi-byte and multi-word quantities are laid out identically: the
byte (word) at the lowest address is the least significant or most
significant byte (word) of the quantity, respectively. If
__BYTE_ORDER__ is equal to __ORDER_PDP_ENDIAN__, then
bytes in 16-bit words are laid out in a little-endian fashion, whereas
the 16-bit subwords of a 32-bit quantity are laid out in big-endian
fashion.
You should use these macros for testing like this:
/* Test for a little-endian machine */
#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
__FLOAT_WORD_ORDER____FLOAT_WORD_ORDER__ is defined to one of the values
__ORDER_LITTLE_ENDIAN__ or __ORDER_BIG_ENDIAN__ to reflect
the layout of the words of multi-word floating-point quantities.
__DEPRECATEDThis macro is defined, with value 1, when compiling a C++ source file with warnings about deprecated constructs enabled. These warnings are enabled by default, but can be disabled with -Wno-deprecated.
__EXCEPTIONSThis macro is defined, with value 1, when compiling a C++ source file with exceptions enabled. If -fno-exceptions is used when compiling the file, then this macro is not defined.
__GXX_RTTIThis macro is defined, with value 1, when compiling a C++ source file with runtime type identification enabled. If -fno-rtti is used when compiling the file, then this macro is not defined.
__USING_SJLJ_EXCEPTIONS__This macro is defined, with value 1, if the compiler uses the old
mechanism based on setjmp and longjmp for exception
handling.
__GXX_EXPERIMENTAL_CXX0X__This macro is defined when compiling a C++ source file with the option -std=c++0x or -std=gnu++0x. It indicates that some features likely to be included in C++0x are available. Note that these features are experimental, and may change or be removed in future versions of GCC.
__GXX_WEAK__This macro is defined when compiling a C++ source file. It has the value 1 if the compiler will use weak symbols, COMDAT sections, or other similar techniques to collapse symbols with “vague linkage” that are defined in multiple translation units. If the compiler will not collapse such symbols, this macro is defined with value 0. In general, user code should not need to make use of this macro; the purpose of this macro is to ease implementation of the C++ runtime library provided with G++.
__NEXT_RUNTIME__This macro is defined, with value 1, if (and only if) the NeXT runtime (as in -fnext-runtime) is in use for Objective-C. If the GNU runtime is used, this macro is not defined, so that you can use this macro to determine which runtime (NeXT or GNU) is being used.
__LP64___LP64These macros are defined, with value 1, if (and only if) the compilation
is for a target where long int and pointer both use 64-bits and
int uses 32-bit.
__SSP__This macro is defined, with value 1, when -fstack-protector is in use.
__SSP_ALL__This macro is defined, with value 2, when -fstack-protector-all is in use.
__SSP_STRONG__This macro is defined, with value 3, when -fstack-protector-strong is in use.
__SSP_EXPLICIT__This macro is defined, with value 4, when -fstack-protector-explicit is in use.
__SANITIZE_ADDRESS__This macro is defined, with value 1, when -fsanitize=address or -fsanitize=kernel-address are in use.
__SANITIZE_THREAD__This macro is defined, with value 1, when -fsanitize=thread is in use.
__TIMESTAMP__This macro expands to a string constant that describes the date and time
of the last modification of the current source file. The string constant
contains abbreviated day of the week, month, day of the month, time in
hh:mm:ss form, year and looks like "Sun Sep 16 01:03:52 1973".
If the day of the month is less than 10, it is padded with a space on the left.
If GCC cannot determine the current date, it will emit a warning message
(once per compilation) and __TIMESTAMP__ will expand to
"??? ??? ?? ??:??:?? ????".
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_1__GCC_HAVE_SYNC_COMPARE_AND_SWAP_2__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4__GCC_HAVE_SYNC_COMPARE_AND_SWAP_8__GCC_HAVE_SYNC_COMPARE_AND_SWAP_16These macros are defined when the target processor supports atomic compare and swap operations on operands 1, 2, 4, 8 or 16 bytes in length, respectively.
__GCC_HAVE_DWARF2_CFI_ASMThis macro is defined when the compiler is emitting DWARF CFI directives to the assembler. When this is defined, it is possible to emit those same directives in inline assembly.
__FP_FAST_FMA__FP_FAST_FMAF__FP_FAST_FMALThese macros are defined with value 1 if the backend supports the
fma, fmaf, and fmal builtin functions, so that
the include file math.h can define the macros
FP_FAST_FMA, FP_FAST_FMAF, and FP_FAST_FMAL
for compatibility with the 1999 C standard.
__GCC_IEC_559This macro is defined to indicate the intended level of support for
IEEE 754 (IEC 60559) floating-point arithmetic. It expands to a
nonnegative integer value. If 0, it indicates that the combination of
the compiler configuration and the command-line options is not
intended to support IEEE 754 arithmetic for float and
double as defined in C99 and C11 Annex F (for example, that the
standard rounding modes and exceptions are not supported, or that
optimizations are enabled that conflict with IEEE 754 semantics). If
1, it indicates that IEEE 754 arithmetic is intended to be supported;
this does not mean that all relevant language features are supported
by GCC. If 2 or more, it additionally indicates support for IEEE
754-2008 (in particular, that the binary encodings for quiet and
signaling NaNs are as specified in IEEE 754-2008).
This macro does not indicate the default state of command-line options
that control optimizations that C99 and C11 permit to be controlled by
standard pragmas, where those standards do not require a particular
default state. It does not indicate whether optimizations respect
signaling NaN semantics (the macro for that is
__SUPPORT_SNAN__). It does not indicate support for decimal
floating point or the IEEE 754 binary16 and binary128 types.
__GCC_IEC_559_COMPLEXThis macro is defined to indicate the intended level of support for IEEE 754 (IEC 60559) floating-point arithmetic for complex numbers, as defined in C99 and C11 Annex G. It expands to a nonnegative integer value. If 0, it indicates that the combination of the compiler configuration and the command-line options is not intended to support Annex G requirements (for example, because -fcx-limited-range was used). If 1 or more, it indicates that it is intended to support those requirements; this does not mean that all relevant language features are supported by GCC.
__NO_MATH_ERRNO__This macro is defined if -fno-math-errno is used, or enabled by another option such as -ffast-math or by default.
Next: System-specific Predefined Macros, Previous: Standard Predefined Macros, Up: Predefined Macros [Contents][Index]