GNU Backgammon

This manual describes how to use GNU Backgammon to play and analyse backgammon games and matches. It corresponds to version 0.02 (updated in February, 2000).

Node:Introduction, Next:, Previous:Top, Up:Top

Introduction

GNU Backgammon (gnubg) plays and analyses backgammon games and matches.

FIXME update this section (latest version is on web page).

It is currently a work-in-progress. So far it is able to play cubeless games and tournament matches, evaluate and roll out positions, tune its own evaluation functions using either TD or supervised training, maintain databases of positions for training and other purposes, and more.

It is driven by a command-line interface, and displays an ASCII rendition of a board on text-only terminals, but also allows the user to play games and manipulate positions with an X11 board window where available.

Plans for the future include completing its ability to play and analyse cubeful games and matches, and making it extensible on platforms where Guile is available, so that the user can program it to answer sophisticated questions like "How many chequers must Black have borne off in positions like this one to be able to accept a double?" and automate complicated rollout tasks.

It currently plays at about the level of a strong intermediate flight tournament player (rated in the mid 1700s on FIBS, the First Internet Backgammon Server -- around the 90th percentile) and is gradually improving; it should be somewhat stronger than this when released. Since almost all of the CPU time required during supervised training is spent performing rollouts, and rollouts can easily be performed in parallel, it is hoped that users will be able to pool rollout results and collectively train it to a level stronger than any individual could obtain.

If you can tolerate the rough edges, periodic snapshots of gnubg and anonymous CVS access to the pre-release source are being made available. You can also compete against recent versions of gnubg on FIBS; it plays there under the names gnu and mgnutest.

Node:How to Play Backgammon, Next:, Previous:Introduction, Up:Top

How to Play Backgammon

The rules presented in this chapter were written by Tom Keith for the Backgammon Galore web site, and are included here with his permission.

Node:Rules of Backgammon, Next:, Up:How to Play Backgammon

Rules of Backgammon

Setup

Backgammon is a game for two players, played on a board consisting of twenty-four narrow triangles called points. The triangles alternate in color and are grouped into four quadrants of six triangles each. The quadrants are referred to as a player's home board and outer board, and the opponent's home board and outer board. The home and outer boards are separated from each other by a ridge down the center of the board called the bar.

rulfig1.png Figure 1. A board with the checkers in their initial position.

An alternate arrangement is the reverse of the one shown here, with the home board on the left and the outer board on the right.

The points are numbered for either player starting in that player's home board. The outermost point is the twenty-four point, which is also the opponent's one point. Each player has fifteen checkers of his own color. The initial arrangement of checkers is: two on each player's twenty-four point, five on each player's thirteen point, three on each player's eight point, and five on each player's six point.

Both players have their own pair of dice and a dice cup used for shaking. A doubling cube, with the numerals 2, 4, 8, 16, 32, and 64 on its faces, is used to keep track of the current stake of the game.

Object of the Game

The object of the game is for a player to move all of his checkers into his own home board and then bear them off. The first player to bear off all of his checkers wins the game.

rulfig2.png Figure 2. Direction of movement of White's checkers. Red's checkers move in the opposite direction.

Movement of the Checkers

To start the game, each player throws a single die. This determines both the player to go first and the numbers to be played. If equal numbers come up, then both players roll again until they roll different numbers. The player throwing the higher number now moves his checkers according to the numbers showing on both dice. After the first roll, the players throw two dice and alternate turns.

The roll of the dice indicates how many points, or pips, the player is to move his checkers. The checkers are always moved forward, to a lower-numbered point. The following rules apply:

  1. A checker may be moved only to an open point, one that is not occupied by two or more opposing checkers.
  2. The numbers on the two dice constitute separate moves. For example, if a player rolls 5 and 3, he may move one checker five spaces to an open point and another checker three spaces to an open point, or he may move the one checker a total of eight spaces to an open point, but only if the intermediate point (either three or five spaces from the starting point) is also open.

    rulfig3.png Figure 3. Two ways that White can play a roll of 53.

  3. A player who rolls doubles plays the numbers shown on the dice twice. A roll of 6 and 6 means that the player has four sixes to use, and he may move any combination of checkers he feels appropriate to complete this requirement.
  4. A player must use both numbers of a roll if this is legally possible (or all four numbers of a double). When only one number can be played, the player must play that number. Or if either number can be played but not both, the player must play the larger one. When neither number can be used, the player loses his turn. In the case of doubles, when all four numbers cannot be played, the player must play as many numbers as he can.

Hitting and Entering

A point occupied by a single checker of either color is called a blot. If an opposing checker lands on a blot, the blot is hit and placed on the bar.

Any time a player has one or more checkers on the bar, his first obligation is to enter those checker(s) into the opposing home board. A checker is entered by moving it to an open point corresponding to one of the numbers on the rolled dice.

For example, if a player rolls 4 and 6, he may enter a checker onto either the opponent's four point or six point, so long as the prospective point is not occupied by two or more of the opponent's checkers.

rulfig4.png Figure 4. If White rolls 64 with a checker on the bar, he must enter the checker onto Red's four point since Red's six point is not open.

If neither of the points is open, the player loses his turn. If a player is able to enter some but not all of his checkers, he must enter as many as he can and then forfeit the remainder of his turn.

After the last of a player's checkers has been entered, any unused numbers on the dice must be played, by moving either the checker that was entered or a different checker.

Bearing Off

Once a player has moved all of his fifteen checkers into his home board, he may commence bearing off. A player bears off a checker by rolling a number that corresponds to the point on which the checker resides, and then removing that checker from the board. Thus, rolling a 6 permits the player to remove a checker from the six point.

If there is no checker on the point indicated by the roll, the player must make a legal move using a checker on a higher-numbered point. If there are no checkers on higher-numbered points, the player is permitted (and required) to remove a checker from the highest point on which one of his checkers resides. A player is under no obligation to bear off if he can make an otherwise legal move.

rulfig5.png Figure 5. White rolls 64 and bears off two checkers.

A player must have all of his active checkers in his home board in order to bear off. If a checker is hit during the bear-off process, the player must bring that checker back to his home board before continuing to bear off. The first player to bear off all fifteen checkers wins the game.

Doubling

Backgammon is played for an agreed stake per point. Each game starts at one point. During the course of the game, a player who feels he has a sufficient advantage may propose doubling the stakes. He may do this only at the start of his own turn and before he has rolled the dice.

A player who is offered a double may refuse, in which case he concedes the game and pays one point. Otherwise, he must accept the double and play on for the new higher stakes. A player who accepts a double becomes the owner of the cube and only he may make the next double.

Subsequent doubles in the same game are called redoubles. If a player refuses a redouble, he must pay the number of points that were at stake prior to the redouble. Otherwise, he becomes the new owner of the cube and the game continues at twice the previous stakes. There is no limit to the number of redoubles in a game.

Gammons and Backgammons

At the end of the game, if the losing player has borne off at least one checker, he loses only the value showing on the doubling cube (one point, if there have been no doubles). However, if the loser has not borne off any of his checkers, he is gammoned and loses twice the value of the doubling cube. Or, worse, if the loser has not borne off any of his checkers and still has a checker on the bar or in the winner's home board, he is backgammoned and loses three times the value of the doubling cube.

Optional Rules

The following optional rules are in widespread use.

Automatic doubles
If identical numbers are thrown on the first roll, the stakes are doubled. The doubling cube is turned to 2 and remains in the middle. Players usually agree to limit the number of automatic doubles to one per game.
Beavers
When a player is doubled, he may immediately redouble (beaver) while retaining possession of the cube. The original doubler has the option of accepting or refusing as with a normal double.
The Jacoby Rule
Gammons and backgammons count only as a single game if neither player has offered a double during the course of the game. This rule speeds up play by eliminating situations where a player avoids doubling so he can play on for a gammon.

Irregularities

  1. The dice must be rolled together and land flat on the surface of the right-hand section of the board. The player must reroll both dice if a die lands outside the right-hand board, or lands on a checker, or does not land flat.
  2. A turn is completed when the player picks up his dice. If the play is incomplete or otherwise illegal, the opponent has the option of accepting the play as made or of requiring the player to make a legal play. A play is deemed to have been accepted as made when the opponent rolls his dice or offers a double to start his own turn.
  3. If a player rolls before his opponent has completed his turn by picking up the dice, the player's roll is voided. This rule is generally waived any time a play is forced or when there is no further contact between the opposing forces.

Node:Match Play, Previous:Rules of Backgammon, Up:How to Play Backgammon

Rules for Match Play

When backgammon tournaments are held to determine an overall winner, the usual style of competition is match play. Competitors are paired off, and each pair plays a series of games to decide which player progresses to the next round of the tournament. This series of games is called a match.

Matches are played to a specified number of points. The first player to accumulate the required points wins the match. Points are awarded in the usual manner: one for a single game, two for a gammon, and three for a backgammon. The doubling cube is used, so the winner receives the value of the game multiplied by the final value of the doubling cube.

Matches are normally played using the Crawford rule. The Crawford rule states that if one player reaches a score one point short of the match, neither player may offer a double in the immediately following game. This one game without doubling is called the Crawford game. Once the Crawford game has been played, if the match has not yet been decided, the doubling cube is active again.

Match to 5  White   Black 
Game 1:  White wins 2 points   2 0  Doubling Allowed
Game 2:Black wins 1 point 2 1
Game 3:White wins 2 points4 1
Game 4:Black wins 1 point 4 2   Crawford Game
Game 5:Black wins 2 points4 4  Doubling Allowed
Game 6:White wins 2 points6 4
In this example, White and Black are playing a 5-point match. After three games White has 4 points, which is just one point short of what he needs. That triggers the Crawford rule which says there can be no doubling in next game, Game 4.

There is no bonus for winning more than the required number of points in match play. The sole goal is to win the match, and the size of the victory doesn't matter.

Automatic doubles, beavers, and the Jacoby rule are not used in match play.

Node:Sample Game, Next:, Previous:How to Play Backgammon, Up:Top

Sample Game

Although GNU Backgammon has many commands and options, only a few of them are used during routine play. This chapter demonstrates some of those most commonly used.

If your gnubg installation is complete, you should be able to start it and see output similar to the following: 

GNU Backgammon 0.02  Copyright 1999 Gary Wong.
GNU Backgammon is free software, covered by the GNU General Public
License, and you are welcome to change it and/or distribute copies
of it under certain conditions.  Type "show copying" to see the
conditions.
There is absolutely no warranty for GNU Backgammon.  Type "show
warranty" for details.
(No game)

When you start a game, gnubg will (by default) show which player's move it is; it is displaying (No game) at the moment to indicate that it isn't anybody's turn.

GNU Backgammon uses a pseudo-random number generator to produce dice rolls. It will normally initialise the state of the generator to some value based on the current time (and perhaps other system information, depending what features are available on your platform). But for purposes of this example, it will be better to start the generator from a known state, so that the rolls it generates will be repeatable. Enter the following command to change the generator state ("seed"): 

(No game) set seed 15
Seed set to 15.
(No game)

The default settings allow you to play X (the black pieces, if you have a graphical board window) and the computer will play O (red). It will play with no lookahead by default; it is very fast at choosing moves in this mode (instantaneous, on most hardware) though it does not play at its full strength. Let's start a game. 

(No game) new game
O rolls 1, X rolls 3.
 GNU Backgammon  Position ID: 4HPwATDgc/ABMA
 +13-14-15-16-17-18------19-20-21-22-23-24-+     O
 | X           O    |   | O              X |
 | X           O    |   | O              X |
 | X           O    |   | O                |
 | X                |   | O                |
 | X                |   | O                |
v|                  |BAR|                  |     (Cube: 1)
 | O                |   | X                |
 | O                |   | X                |
 | O           X    |   | X                |
 | O           X    |   | X              O |
 | O           X    |   | X              O |     Rolled 13
 +12-11-10--9--8--7-------6--5--4--3--2--1-+     X

(X)

This is the output you will see if a graphical board is unavailable or disabled; if your environment supports a graphical board, you will see a better representation of a backgammon board than this. Exactly the same information is available, either way.

You have just won the opening roll (you have a 3, and gnubg has a 1) -- the dice roll is in the bottom right hand corner for the TTY board, or shown as graphical dice on the right hand side of the board window. The position ID (the 4HPwATDgc/ABMA in this example) is an encoded representation of the current position. It comes in useful when using some of gnubg's advanced commands, but you can safely ignore it for now. Notice that the prompt has changed to (X), to indicate that it is X's (your) turn.

If you are familiar with backgammon, you will know that the best play for this roll is to make your 5 point. The command to do that is: 

(X) 8 5 6 5

in the terminal window (i.e. move one chequer from your 8 point to your 5 point, and move another from your 6 to your 5 point); or by dragging each chequer to the destination point with mouse button 1 in the board window. Click mouse button 1 on the dice to indicate you have finished your move (just as you would pick up your dice to end your move if you were playing on a real board).

Once you have done that, gnubg will take its turn, rolling 63 and playing 24/15. It is now your move again: 

 GNU Backgammon  Position ID: 4HPwCSCwZ/ABMA
 +13-14-15-16-17-18------19-20-21-22-23-24-+     O
 | X           O    |   | O              X |
 | X           O    |   | O              X |
 | X           O    |   | O                |
 | X                |   | O                |
 | X                |   | O                |
v|                  |BAR|                  |     (Cube: 1)
 | O                |   |                  |
 | O                |   | X                |
 | O                |   | X                |
 | O           X    |   | X  X             |
 | O     O     X    |   | X  X           O |     On roll
 +12-11-10--9--8--7-------6--5--4--3--2--1-+     X

(X)

Since it is no longer the opening roll, you have the option of doubling before rolling your dice. To roll without doubling, just enter the command roll (or r for short): 

(X) roll
 GNU Backgammon  Position ID: 4HPwCSCwZ/ABMA
 +13-14-15-16-17-18------19-20-21-22-23-24-+     O
 | X           O    |   | O              X |
 | X           O    |   | O              X |
 | X           O    |   | O                |
 | X                |   | O                |
 | X                |   | O                |
v|                  |BAR|                  |     (Cube: 1)
 | O                |   |                  |
 | O                |   | X                |
 | O                |   | X                |
 | O           X    |   | X  X             |
 | O     O     X    |   | X  X           O |     Rolled 35
 +12-11-10--9--8--7-------6--5--4--3--2--1-+     X

(X)

(You can also roll by clicking the dice just underneath the board window.)

Let's play this roll by hitting twice: 13/10*, 6/1*. You can enter this move with 13 10 6 1 -- note that you don't need to specify anything special to hit; gnubg will automatically move blots that are hit to the bar. You can also make this move by dragging chequers in the board window, of course. 

(X) 13 10 6 1
 GNU Backgammon  Position ID: 4HPwAWBhZ+IBMA
 +13-14-15-16-17-18------19-20-21-22-23-24-+     O
 | X           O    | O | O              X |
 | X           O    | O | O              X |
 | X           O    |   | O                |
 | X                |   | O                |
 |                  |   | O                |
v|                  |BAR|                  |     (Cube: 1)
 | O                |   |                  |
 | O                |   |                  |
 | O                |   | X                |
 | O           X    |   | X  X             |
 | O     X     X    |   | X  X           X |     On roll
 +12-11-10--9--8--7-------6--5--4--3--2--1-+     X

(X)

GNU Backgammon has rolled 65 and been unable to move. Let's take another roll: 

(X) roll
 GNU Backgammon  Position ID: 4HPwAWBhZ+IBMA
 +13-14-15-16-17-18------19-20-21-22-23-24-+     O
 | X           O    | O | O              X |
 | X           O    | O | O              X |
 | X           O    |   | O                |
 | X                |   | O                |
 |                  |   | O                |
v|                  |BAR|                  |     (Cube: 1)
 | O                |   |                  |
 | O                |   |                  |
 | O                |   | X                |
 | O           X    |   | X  X             |
 | O     X     X    |   | X  X           X |     Rolled 25
 +12-11-10--9--8--7-------6--5--4--3--2--1-+     X

(X)

Play this roll as 13 11 6 1. gnubg will now roll 16 -- and still can't move! 

 GNU Backgammon  Position ID: 4HPwAWDDZsoBMA
 +13-14-15-16-17-18------19-20-21-22-23-24-+     O
 | X           O    | O | O              X |
 | X           O    | O | O              X |
 | X           O    |   | O                |
 |                  |   | O                |
 |                  |   | O                |
v|                  |BAR|                  |     (Cube: 1)
 | O                |   |                  |
 | O                |   |                  |
 | O                |   |                  |
 | O           X    |   | X  X           X |
 | O  X  X     X    |   | X  X           X |     On roll
 +12-11-10--9--8--7-------6--5--4--3--2--1-+     X

(X)

Our position is now strong. Let's try doubling -- this can be done by entering the command double at the prompt, or by clicking the doubling cube in the board window (FIXME not implemented yet). When you are doubled, you should use the command take or drop to accept or refuse the cube. GNU Backgammon will drop this double (FIXME actually it doesn't, but it will once it knows how): 

(X) double
O refuses the cube and gives up 1 point.
X wins a single game and 1 points.
The score (after 1 game) is: O 0, X 1.

That concludes the example game. You have seen most of the commands normally used while playing; others you will need include bar when re-entering a hit chequer (e.g. bar 20 24 20) and off to remove a chequer from the board when bearing off (e.g. 6 off 5 off).

Type help from within gnubg for a summary of all commands, or browse the rest of this manual to learn more. Have fun playing GNU Backgammon!

Node:Invocation, Next:, Previous:Sample Game, Up:Top

Starting and Leaving gnubg

This chapter describes how to run gnubg, and how to end it when you are finished.

Node:Invoking gnubg, Next:, Up:Invocation

Invoking gnubg

Start GNU Backgammon by running the program gnubg. Once started, it will process commands from the terminal.

You can also instruct gnubg to read an existing match from a file, to play or analyse. (FIXME actually you can't yet, but you should be able to.) To read the match from filename, specify gnubg filename.

gnubg will give you a short summary of how to invoke it if given the option --help (-h for short), and report its version with --version (-v).

GNU Backgammon will normally use a graphical board window under the X Window System, if possible. To prevent this behaviour and use standard terminal output instead, you can specify the --tty option (which can be abbreviated to -t).

Node:Leaving gnubg, Next:, Previous:Invoking gnubg, Up:Invocation

Leaving gnubg

exit
quit
To exit gnubg, use the exit or quit commands (they are synonymous). If you are currently playing a game, the match in progress will be lost, so gnubg will ask you if you are sure you want to exit in this case. (FIXME it doesn't yet, but it should.)

gnubg will also exit upon end-of-file; you can therefore exit by typing an end-of-file character (usually C-d, i.e. hold the <CTRL> key and press D).

If you send an interrupt sequence (often by pressing C-c), the current gnubg command (if any) will be terminated. This can be useful if you do not want to wait for a slow command to complete.

Node:Shell Commands, Previous:Leaving gnubg, Up:Invocation

Shell Commands

You can execute shell commands from gnubg without leaving or suspending it.

!command
Invoke a subshell to execute command. The environment variable SHELL determines which shell to use (gnubg defaults to /bin/sh if $SHELL is not set). If command is not specified, the shell will be invoked. FIXME not implemented yet.

Node:Basic Commands, Next:, Previous:Invocation, Up:Top

Basic Commands

There are a few simple commands you can use within GNU Backgammon to display information you might need to know:

help command
? command
Describe the commands that gnubg understands. help by itself lists the main commands with a one-line description of each; when command is specified, that command is explained in more detail, and if it has any subcommands then they are listed in brief.

? is a synonym for help.

show copying
show warranty
These commands are used to show the conditions GNU Backgammon is distributed under. FIXME summarise GPL.

Node:Playing, Next:, Previous:Basic Commands, Up:Top

Playing Backgammon with gnubg

FIXME introduction

Node:The Game, Next:, Up:Playing

Commands Used During the Game

new game
This command is used to start a game within a match or session. (Note that all games are played within matches or sessions; see Matches and Sessions. To play a single game, use either a 1 point match or a session lasting for one game, depending whether you want gammons and the doubling cube to be active.) new game will set up the board in the starting position, and roll one die for each player for the opening move.

If you are in the middle of a game, new game will ask you if you want to abort the game in progress. If you do, a new game will replace the current one (i.e. the partially completed game will have no effect on the score). If you want the current game to be scored for either player, you should use the resign command instead.

move from to ...
from to ...
The move command allows you to make chequer plays when it is your turn. In its normal form, you should specify pairs of point numbers indicating the points you want to move a chequer from and to. Specify one pair for each chequer you want to move. (For instance, on an opening roll of 31, you might use move 8 5 6 5 to move two chequers -- one from your 8 point to your 5 point, and the other from your 6 point to your 5 point.) For several example moves, see Sample Game.

You should use the words bar and off when moving a chequer from the bar or bearing it off the board, e.g. move bar 20 or move 3 off. These words can be abbreviated to b and o respectively.

If there is only one legal move you can make, then the command move by itself will make it for you without requiring you to specify it in full. Similarly, if there is no play available at all, then move will end your turn without moving.

As long as you specify at least one pair of points, then the word move is optional -- the command bar 20 24 20 means exactly the same thing as move bar 20 24 20, for instance.

If you are using the X Window System, you can also move chequers using the board window. One way to do this is to use mouse button 1 to drag a chequer (that is, press the button when the pointer is over the chequer you wish to move; move the pointer to the point you wish to play it to, and then release the button).

An alternative is to click buttons 2 or 3 on the chequer; button 2 will move it by the number of pips showing on the left die, and button 3 will move it according to the right die. If you don't like the order the dice are displayed in, pressing either button 2 or 3 on the dice will swap their positions.

Whichever method you use to move the chequers, once you have made a legal move you can end your turn by clicking mouse button 1 on the dice.

FIXME reference set automove and set autobearoff.

resign [type]
agree
accept
decline
reject
The resign command is used to give up a game without playing it to completion. It is often useful during endgame play when the game reaches a position where it is impossible for one player to win. If you do not specify a value type, then the player whose turn it is offers to give up one game (at the current cube value) to the opponent; you can also specify 1, 2 or 3 to resign a single, double or triple game. Specifying normal, gammon or backgammon is also legal, and is identical to expressing the number of points as a digit. single is yet another synonym for one game.

The opponent may accept the resignation with either the agree or accept commands, but is not obliged to. To ignore the resignation and continue play normally, use either the decline or reject commands. (accept and reject are also legal commands in response to a double; see Cube.)

set board id
If you wish to directly set the chequers to a different position, you can use the set board command. You need to know the position ID of the chequer arrangement you want; position IDs are always displayed when the board is shown. (If you are playing on a text terminal, the position ID is in the upper right hand corner of the board diagram; when using the X board window, the ID is shown below the board on the right hand side.) For instance, to set the chequers to the starting position, use the command set board 4HPwATDgc/ABMA.

FIXME add a mode to set the board to an arbitrary position when the user doesn't know the ID, in the X version at least.

show board [id]
The show board command is used to display a particular position -- normally the board of the current game, but it is also possible to view unrelated layouts. When specified without the optional id parameter, the current position is displayed. (When using a text terminal, this is useful if subsequent output has caused the board diagram to scroll off the screen. In the X board window, the command can be used to undo erroneous chequer plays by resetting the window to the position at the start of the turn.)

When a position ID id is given, the chequers are arranged into the position specified and that board is displayed. Note that this command affects the display only; the current game is unchanged. Use the show board command with no parameter if you want to see the current game again.

hint
At any time during the game when the dice have been rolled, you can use the hint command to see the moves gnubg recommends. The output is of the following form: 
Win    W(g)   W(bg)  L(g)   L(bg)  Equity       Move
0.542  0.142  0.008  0.113  0.008  (+0.114)     6/5 8/5
0.505  0.120  0.008  0.122  0.007  (+0.009)     24/23 23/20
0.498  0.126  0.008  0.123  0.007  (+0.000)     24/23 13/10
0.499  0.113  0.008  0.121  0.007  (-0.011)     24/23 24/21
0.486  0.125  0.008  0.120  0.009  (-0.024)     13/10 10/9
0.481  0.116  0.008  0.129  0.008  (-0.051)     6/5 24/21
0.472  0.122  0.008  0.129  0.009  (-0.064)     6/5 13/10

The moves are listed in descending order of preference, so in this case, gnubg recommends the move 6/5 8/5. The first five columns are its estimates of the probability of the player on roll winning (Win), winning a gammon (W(g)), winning a backgammon (W(bg)), losing a gammon (L(g)), and losing a backgammon (L(bg)) if the game is played to completion without use of the doubling cube, after the candidate move in that row is made1. The sixth column, Equity, is the estimated cubeless equity following the move -- this is the expected number of points per game won by the player on roll.

gnubg will `look ahead' a certain number of moves when evaluating the probabilities, according to the search depth set by the set plies command (see Analysis).

show pipcount
Use show pipcount to automatically count the number of `pips' each player needs to bear off. Depending on the position, the output will look something like: 
The pip counts are: X 103, O 112.
show player
set player name human
set player old-name name new-name
Both players have a certain amount of configuration information; use the command show player to summarise these settings. By default, gnubg will play for player 0, whose name is initially O. Player 1 defaults to a human (i.e. gnubg will prompt the user for a move when it is player 1's turn) whose name is X.

Either player can be set to a human with the command set player name human, where name is either the number of the player (0 or 1) or that player's name (initially O and X). You can also specify both which will set both players simultaneously. There are also options for computer players (see Computer Player).

You can change the names of the players with the set player old-name name new-name command. Again, either the player numbers or names are valid for the old-name parameter. Names may not contain whitespace characters, and may not be longer than 31 characters. The names 0, 1 and both are not permitted, to avoid ambiguities, and the players may not both share the same name. Names are not case sensitive.

set turn player
show turn
FIXME
set autobearoff
set automove
FIXME
set display
FIXME

Node:Dice, Next:, Previous:The Game, Up:Playing

Controlling Dice Rolls

set rng generator [seed]
show rng
roll
set autoroll
set dice pips pips
FIXME

Node:Computer Player, Next:, Previous:Dice, Up:Playing

Having gnubg Make Moves

play
set player name gnubg
set player name pubeval
set player name plies depth
FIXME

Node:Matches and Sessions, Next:, Previous:Computer Player, Up:Playing

Matches and Sessions

This section describes how to use GNU Backgammon to play series of games, whether those games are part of a match (as in tournament backgammon) or a session of independent games (conventionally called "money" play, regardless of whether any money is involved).

new match length
new session
set autogame
set crawford
set postcrawford
set autocrawford
set jacoby
set autodoubles limit
set score points points
show crawford
show postcrawford
show jacoby
show score
FIXME

Node:Cube, Next:, Previous:Matches and Sessions, Up:Playing

The Doubling Cube

double
redouble
beaver
take
accept
drop
reject
set cube centre
set cube owner player
set cube value points
FIXME

Node:Recording, Previous:Cube, Up:Playing

Saving Games and Matches

save game file
save match file
load game file
load match file
FIXME

Node:Analysis, Next:, Previous:Playing, Up:Top

Using gnubg to Analyse Positions

eval [id]
rollout [id]
set plies depth
set cache size
show cache
FIXME

Node:Databases, Next:, Previous:Analysis, Up:Top

Position Databases

database dump
database evaluate
database generate
FIXME
database train
train database
FIXME pointer only

Node:Training, Next:, Previous:Databases, Up:Top

Modifying gnubg's Neural Nets

save weights file
load weights file
database train
train database
FIXME

Node:Frequently Asked Questions, Next:, Previous:Training, Up:Top

Frequently Asked Questions

Node:Where can I get GNU Backgammon?, Next:, Up:Frequently Asked Questions

Where can I get GNU Backgammon?

Pre-release snapshots of GNU Backgammon are periodically made available for FTP at ftp://alpha.gnu.org/gnu/gnubg/.

If you want to experiment with the very latest code, the development sources are kept in a CVS repository at http://subversions.gnu.org/cgi-bin/cvsweb/gnubg/; see the gnubg web page at http://www.gnu.org/software/gnubg/gnubg.html for instructions on checking out sources from the repository.

Node:How do I play a game?, Next:, Previous:Where can I get GNU Backgammon?, Up:Frequently Asked Questions

How do I play a game?

Once you are running gnubg, enter new game at the (gnubg) prompt to start a game against the computer opponent. You should now see a board (if an X display is available, gnubg will use a graphical board window; otherwise, it will display an ASCII board on your terminal). If gnubg won the opening roll, it will have moved; you can now type roll (or click on the dice below the board if you are using X) to roll the dice yourself. In either case, it will now be your move; you should enter the moves for each chequer as pairs of numbers. For instance, if you have rolled 3 and 1, you could type 8 5 6 5 to move one chequer from the 8 point to the 5 point and another from the 6 point to the 5 point. Use bar to move from the bar, and off to bear off. If you are using the X board window, you can also drag chequers around the board with mouse button 1. Click on the dice when you have finished.

Node:gnubg.bd errors, Next:, Previous:How do I play a game?, Up:Frequently Asked Questions

I only see gnubg.bd: No such file or directory. What's wrong?

The file gnubg.bd is the bearoff database that gnubg uses to evaluate endgame positions. gnubg will look for it first in the current directory and then in the installed directory (/usr/local/share/gnubg/ by default).

The gnubg distribution is set up to create gnubg.bd by itself during compilation, but it can be a slow process (taking half an hour or more, depending on the speed of your computer). If you would rather not wait to generate the database yourself, you can obtain a copy via FTP from ftp://alpha.gnu.org/gnu/gnubg/gnubg.bd.gz.

Node:gnubg.weights errors, Next:, Previous:gnubg.bd errors, Up:Frequently Asked Questions

Now I get gnubg.weights: No such file or directory. What's that?

The file gnubg.weights contains the trained neural net weights for most of gnubg's position evaluators. Like gnubg.bd, it should be kept in either the current directory or the installed directory.

You should be able to obtain a copy from wherever you found the gnubg distribution. Future releases of gnubg will allow you to start without any existing weights at all, if you want to train your own.

Node:Black and white board window, Previous:gnubg.weights errors, Up:Frequently Asked Questions

The board window is shown in black and white and looks awful! What's wrong?

If you see this problem, your X server is probably using a PseudoColor visual, and is dynamically allocating colours to clients from a limited colourmap. On these types of displays, gnubg tries to be a well-behaved client by using colours from the default standard colourmap. This will allow it to share colours with other clients that use the same scheme, which will help them all to use as many colours as possible without exhausting the colourmap.

Unfortunately, not all X clients use standard colourmaps. If other clients have been run before gnubg and allocated most of the colours, then there may not be enough left for gnubg to allocate a standard colourmap. If this happens, it will just take what it can get (which in the worst case might be black and white only). You can try to avoid this problem by running gnubg before other colour-hungry clients, or by using the xstdcmap utility to install the default standard colourmap early in your session while colours are still available. Depending on your hardware, you may be able to configure your display to allow more colours, or use a DirectColor or TrueColor visual which should resolve the problem.

Of course, if your X server can only display black and white (not even shades of grey), then there's not much you can do!

Node:Command Index, Next:, Previous:Frequently Asked Questions, Up:Top

Command Index

Menu

Node:Concept Index, Previous:Command Index, Up:Top

Index

Menu

Table of Contents

Footnotes

  1. Note that the probability of winning includes the probability of winning a gammon or backgammon, and likewise the gammon probabilities include the backgammon probabilities.