Here is the basic stack layout.
Define this macro to be true if pushing a word onto the stack moves the stack pointer to a smaller address, and false otherwise.
This macro defines the operation used when something is pushed
on the stack. In RTL, a push operation will be
(set (mem (STACK_PUSH_CODE (reg sp))) …)
The choices are PRE_DEC, POST_DEC, PRE_INC,
and POST_INC. Which of these is correct depends on
the stack direction and on whether the stack pointer points
to the last item on the stack or whether it points to the
space for the next item on the stack.
The default is PRE_DEC when STACK_GROWS_DOWNWARD is
true, which is almost always right, and PRE_INC otherwise,
which is often wrong.
Define this macro to nonzero value if the addresses of local variable slots are at negative offsets from the frame pointer.
Define this macro if successive arguments to a function occupy decreasing addresses on the stack.
HOST_WIDE_INT TARGET_STARTING_FRAME_OFFSET (void) ¶This hook returns the offset from the frame pointer to the first local
variable slot to be allocated. If FRAME_GROWS_DOWNWARD, it is the
offset to end of the first slot allocated, otherwise it is the
offset to beginning of the first slot allocated. The default
implementation returns 0.
Define to zero to disable final alignment of the stack during reload. The nonzero default for this macro is suitable for most ports.
On ports where TARGET_STARTING_FRAME_OFFSET is nonzero or where there
is a register save block following the local block that doesn’t require
alignment to STACK_BOUNDARY, it may be beneficial to disable
stack alignment and do it in the backend.
Offset from the stack pointer register to the first location at which outgoing arguments are placed. If not specified, the default value of zero is used. This is the proper value for most machines.
If ARGS_GROW_DOWNWARD, this is the offset to the location above
the first location at which outgoing arguments are placed.
Offset from the argument pointer register to the first argument’s address. On some machines it may depend on the data type of the function.
If ARGS_GROW_DOWNWARD, this is the offset to the location above
the first argument’s address.
Offset from the stack pointer register to an item dynamically allocated
on the stack, e.g., by alloca.
The default value for this macro is STACK_POINTER_OFFSET plus the
length of the outgoing arguments. The default is correct for most
machines. See function.cc for details.
A C expression whose value is RTL representing the address of the initial
stack frame. This address is passed to RETURN_ADDR_RTX and
DYNAMIC_CHAIN_ADDRESS. If you don’t define this macro, a reasonable
default value will be used. Define this macro in order to make frame pointer
elimination work in the presence of __builtin_frame_address (count) and
__builtin_return_address (count) for count not equal to zero.
A C expression whose value is RTL representing the address in a stack frame where the pointer to the caller’s frame is stored. Assume that frameaddr is an RTL expression for the address of the stack frame itself.
If you don’t define this macro, the default is to return the value of frameaddr—that is, the stack frame address is also the address of the stack word that points to the previous frame.
A C expression that produces the machine-specific code to setup the stack so that arbitrary frames can be accessed. For example, on the SPARC, we must flush all of the register windows to the stack before we can access arbitrary stack frames. You will seldom need to define this macro. The default is to do nothing.
rtx TARGET_BUILTIN_SETJMP_FRAME_VALUE (void) ¶This target hook should return an rtx that is used to store
the address of the current frame into the built in setjmp buffer.
The default value, virtual_stack_vars_rtx, is correct for most
machines. One reason you may need to define this target hook is if
hard_frame_pointer_rtx is the appropriate value on your machine.
A C expression whose value is RTL representing the value of the frame address for the current frame. frameaddr is the frame pointer of the current frame. This is used for __builtin_frame_address. You need only define this macro if the frame address is not the same as the frame pointer. Most machines do not need to define it.
A C expression whose value is RTL representing the value of the return
address for the frame count steps up from the current frame, after
the prologue. frameaddr is the frame pointer of the count
frame, or the frame pointer of the count − 1 frame if
RETURN_ADDR_IN_PREVIOUS_FRAME is nonzero.
The value of the expression must always be the correct address when
count is zero, but may be NULL_RTX if there is no way to
determine the return address of other frames.
Define this macro to nonzero value if the return address of a particular stack frame is accessed from the frame pointer of the previous stack frame. The zero default for this macro is suitable for most ports.
A C expression whose value is RTL representing the location of the
incoming return address at the beginning of any function, before the
prologue. This RTL is either a REG, indicating that the return
value is saved in ‘REG’, or a MEM representing a location in
the stack.
You only need to define this macro if you want to support call frame debugging information like that provided by DWARF 2.
If this RTL is a REG, you should also define
DWARF_FRAME_RETURN_COLUMN to DWARF_FRAME_REGNUM (REGNO).
A C expression whose value is an integer giving a DWARF 2 column
number that may be used as an alternative return column. The column
must not correspond to any gcc hard register (that is, it must not
be in the range of DWARF_FRAME_REGNUM).
This macro can be useful if DWARF_FRAME_RETURN_COLUMN is set to a
general register, but an alternative column needs to be used for signal
frames. Some targets have also used different frame return columns
over time.
A C expression whose value is an integer giving a DWARF 2 register number that is considered to always have the value zero. This should only be defined if the target has an architected zero register, and someone decided it was a good idea to use that register number to terminate the stack backtrace. New ports should avoid this.
void TARGET_DWARF_HANDLE_FRAME_UNSPEC (const char *label, rtx pattern, int index) ¶This target hook allows the backend to emit frame-related insns that contain UNSPECs or UNSPEC_VOLATILEs. The DWARF 2 call frame debugging info engine will invoke it on insns of the form
(set (reg) (unspec […] UNSPEC_INDEX))
and
(set (reg) (unspec_volatile […] UNSPECV_INDEX)).
to let the backend emit the call frame instructions. label is
the CFI label attached to the insn, pattern is the pattern of
the insn and index is UNSPEC_INDEX or UNSPECV_INDEX.
unsigned int TARGET_DWARF_POLY_INDETERMINATE_VALUE (unsigned int i, unsigned int *factor, int *offset) ¶Express the value of poly_int indeterminate i as a DWARF
expression, with i counting from 1. Return the number of a DWARF
register R and set ‘*factor’ and ‘*offset’ such
that the value of the indeterminate is:
value_of(R) / factor - offset
A target only needs to define this hook if it sets ‘NUM_POLY_INT_COEFFS’ to a value greater than 1.
A C expression whose value is an integer giving the offset, in bytes, from the value of the stack pointer register to the top of the stack frame at the beginning of any function, before the prologue. The top of the frame is defined to be the value of the stack pointer in the previous frame, just before the call instruction.
You only need to define this macro if you want to support call frame debugging information like that provided by DWARF 2.
Like INCOMING_FRAME_SP_OFFSET, but must be the same for all
functions of the same ABI, and when using GAS .cfi_* directives
must also agree with the default CFI GAS emits. Define this macro
only if INCOMING_FRAME_SP_OFFSET can have different values
between different functions of the same ABI or when
INCOMING_FRAME_SP_OFFSET does not agree with GAS default CFI.
A C expression whose value is an integer giving the offset, in bytes,
from the argument pointer to the canonical frame address (cfa). The
final value should coincide with that calculated by
INCOMING_FRAME_SP_OFFSET. Which is unfortunately not usable
during virtual register instantiation.
The default value for this macro is
FIRST_PARM_OFFSET (fundecl) + crtl->args.pretend_args_size,
which is correct for most machines; in general, the arguments are found
immediately before the stack frame. Note that this is not the case on
some targets that save registers into the caller’s frame, such as SPARC
and rs6000, and so such targets need to define this macro.
You only need to define this macro if the default is incorrect, and you want to support call frame debugging information like that provided by DWARF 2.
If defined, a C expression whose value is an integer giving the offset
in bytes from the frame pointer to the canonical frame address (cfa).
The final value should coincide with that calculated by
INCOMING_FRAME_SP_OFFSET.
Normally the CFA is calculated as an offset from the argument pointer,
via ARG_POINTER_CFA_OFFSET, but if the argument pointer is
variable due to the ABI, this may not be possible. If this macro is
defined, it implies that the virtual register instantiation should be
based on the frame pointer instead of the argument pointer. Only one
of FRAME_POINTER_CFA_OFFSET and ARG_POINTER_CFA_OFFSET
should be defined.
If defined, a C expression whose value is an integer giving the offset in bytes from the canonical frame address (cfa) to the frame base used in DWARF 2 debug information. The default is zero. A different value may reduce the size of debug information on some ports.