Here are several miscellaneous parameters.
Define this boolean macro to indicate whether or not your architecture has conditional branches that can span all of memory. It is used in conjunction with an optimization that partitions hot and cold basic blocks into separate sections of the executable. If this macro is set to false, gcc will convert any conditional branches that attempt to cross between sections into unconditional branches or indirect jumps.
Define this boolean macro to indicate whether or not your architecture has unconditional branches that can span all of memory. It is used in conjunction with an optimization that partitions hot and cold basic blocks into separate sections of the executable. If this macro is set to false, gcc will convert any unconditional branches that attempt to cross between sections into indirect jumps.
An alias for a machine mode name. This is the machine mode that elements of a jump-table should have.
Optional: return the preferred mode for an addr_diff_vec
when the minimum and maximum offset are known. If you define this,
it enables extra code in branch shortening to deal with addr_diff_vec.
To make this work, you also have to define INSN_ALIGN and
make the alignment for addr_diff_vec explicit.
The body argument is provided so that the offset_unsigned and scale
flags can be updated.
Define this macro to be a C expression to indicate when jump-tables should contain relative addresses. You need not define this macro if jump-tables never contain relative addresses, or jump-tables should contain relative addresses only when -fPIC or -fPIC is in effect.
unsigned int TARGET_CASE_VALUES_THRESHOLD (void) ¶This function return the smallest number of different values for which it
is best to use a jump-table instead of a tree of conditional branches.
The default is four for machines with a casesi instruction and
five otherwise. This is best for most machines.
Define this macro to 1 if operations between registers with integral mode
smaller than a word are always performed on the entire register. To be
more explicit, if you start with a pair of word_mode registers with
known values and you do a subword, for example QImode, addition on
the low part of the registers, then the compiler may consider that the
result has a known value in word_mode too if the macro is defined
to 1. Most RISC machines have this property and most CISC machines do not.
unsigned int TARGET_MIN_ARITHMETIC_PRECISION (void) ¶On some RISC architectures with 64-bit registers, the processor also maintains 32-bit condition codes that make it possible to do real 32-bit arithmetic, although the operations are performed on the full registers.
On such architectures, defining this hook to 32 tells the compiler to try using 32-bit arithmetical operations setting the condition codes instead of doing full 64-bit arithmetic.
More generally, define this hook on RISC architectures if you want the compiler to try using arithmetical operations setting the condition codes with a precision lower than the word precision.
You need not define this hook if WORD_REGISTER_OPERATIONS is not
defined to 1.
Define this macro to be a C expression indicating when insns that read
memory in mem_mode, an integral mode narrower than a word, set the
bits outside of mem_mode to be either the sign-extension or the
zero-extension of the data read. Return SIGN_EXTEND for values
of mem_mode for which the
insn sign-extends, ZERO_EXTEND for which it zero-extends, and
UNKNOWN for other modes.
This macro is not called with mem_mode non-integral or with a width
greater than or equal to BITS_PER_WORD, so you may return any
value in this case. Do not define this macro if it would always return
UNKNOWN. On machines where this macro is defined, you will normally
define it as the constant SIGN_EXTEND or ZERO_EXTEND.
You may return a non-UNKNOWN value even if for some hard registers
the sign extension is not performed, if for the REGNO_REG_CLASS
of these hard registers TARGET_CAN_CHANGE_MODE_CLASS returns false
when the from mode is mem_mode and the to mode is any
integral mode larger than this but not larger than word_mode.
You must return UNKNOWN if for some hard registers that allow this
mode, TARGET_CAN_CHANGE_MODE_CLASS says that they cannot change to
word_mode, but that they can change to another integral mode that
is larger then mem_mode but still smaller than word_mode.
Define this macro to 1 if loading short immediate values into registers sign extends.
unsigned int TARGET_MIN_DIVISIONS_FOR_RECIP_MUL (machine_mode mode) ¶When -ffast-math is in effect, GCC tries to optimize divisions by the same divisor, by turning them into multiplications by the reciprocal. This target hook specifies the minimum number of divisions that should be there for GCC to perform the optimization for a variable of mode mode. The default implementation returns 3 if the machine has an instruction for the division, and 2 if it does not.
The maximum number of bytes that a single instruction can move quickly between memory and registers or between two memory locations.
The maximum number of bytes that a single instruction can move quickly
between memory and registers or between two memory locations. If this
is undefined, the default is MOVE_MAX. Otherwise, it is the
constant value that is the largest value that MOVE_MAX can have
at run-time.
A C expression that is nonzero if on this machine the number of bits
actually used for the count of a shift operation is equal to the number
of bits needed to represent the size of the object being shifted. When
this macro is nonzero, the compiler will assume that it is safe to omit
a sign-extend, zero-extend, and certain bitwise ‘and’ instructions that
truncates the count of a shift operation. On machines that have
instructions that act on bit-fields at variable positions, which may
include ‘bit test’ instructions, a nonzero SHIFT_COUNT_TRUNCATED
also enables deletion of truncations of the values that serve as
arguments to bit-field instructions.
If both types of instructions truncate the count (for shifts) and position (for bit-field operations), or if no variable-position bit-field instructions exist, you should define this macro.
However, on some machines, such as the 80386 and the 680x0, truncation
only applies to shift operations and not the (real or pretended)
bit-field operations. Define SHIFT_COUNT_TRUNCATED to be zero on
such machines. Instead, add patterns to the md file that include
the implied truncation of the shift instructions.
You need not define this macro if it would always have the value of zero.
unsigned HOST_WIDE_INT TARGET_SHIFT_TRUNCATION_MASK (machine_mode mode) ¶This function describes how the standard shift patterns for mode deal with shifts by negative amounts or by more than the width of the mode. See shift patterns.
On many machines, the shift patterns will apply a mask m to the shift count, meaning that a fixed-width shift of x by y is equivalent to an arbitrary-width shift of x by y & m. If this is true for mode mode, the function should return m, otherwise it should return 0. A return value of 0 indicates that no particular behavior is guaranteed.
Note that, unlike SHIFT_COUNT_TRUNCATED, this function does
not apply to general shift rtxes; it applies only to instructions
that are generated by the named shift patterns.
The default implementation of this function returns
GET_MODE_BITSIZE (mode) - 1 if SHIFT_COUNT_TRUNCATED
and 0 otherwise. This definition is always safe, but if
SHIFT_COUNT_TRUNCATED is false, and some shift patterns
nevertheless truncate the shift count, you may get better code
by overriding it.
bool TARGET_TRULY_NOOP_TRUNCATION (poly_uint64 outprec, poly_uint64 inprec) ¶This hook returns true if it is safe to “convert” a value of
inprec bits to one of outprec bits (where outprec is
smaller than inprec) by merely operating on it as if it had only
outprec bits. The default returns true unconditionally, which
is correct for most machines. When TARGET_TRULY_NOOP_TRUNCATION
returns false, the machine description should provide a trunc
optab to specify the RTL that performs the required truncation.
If TARGET_MODES_TIEABLE_P returns false for a pair of modes,
suboptimal code can result if this hook returns true for the corresponding
mode sizes. Making this hook return false in such cases may improve things.
int TARGET_MODE_REP_EXTENDED (scalar_int_mode mode, scalar_int_mode rep_mode) ¶The representation of an integral mode can be such that the values
are always extended to a wider integral mode. Return
SIGN_EXTEND if values of mode are represented in
sign-extended form to rep_mode. Return UNKNOWN
otherwise. (Currently, none of the targets use zero-extended
representation this way so unlike LOAD_EXTEND_OP,
TARGET_MODE_REP_EXTENDED is expected to return either
SIGN_EXTEND or UNKNOWN. Also no target extends
mode to rep_mode so that rep_mode is not the next
widest integral mode and currently we take advantage of this fact.)
Similarly to LOAD_EXTEND_OP you may return a non-UNKNOWN
value even if the extension is not performed on certain hard registers
as long as for the REGNO_REG_CLASS of these hard registers
TARGET_CAN_CHANGE_MODE_CLASS returns false.
Note that TARGET_MODE_REP_EXTENDED and LOAD_EXTEND_OP
describe two related properties. If you define
TARGET_MODE_REP_EXTENDED (mode, word_mode) you probably also want
to define LOAD_EXTEND_OP (mode) to return the same type of
extension.
In order to enforce the representation of mode,
TARGET_TRULY_NOOP_TRUNCATION should return false when truncating to
mode.
bool TARGET_SETJMP_PRESERVES_NONVOLATILE_REGS_P (void) ¶On some targets, it is assumed that the compiler will spill all pseudos
that are live across a call to setjmp, while other targets treat
setjmp calls as normal function calls.
This hook returns false if setjmp calls do not preserve all
non-volatile registers so that gcc that must spill all pseudos that are
live across setjmp calls. Define this to return true if the
target does not need to spill all pseudos live across setjmp calls.
The default implementation conservatively assumes all pseudos must be
spilled across setjmp calls.
A C expression describing the value returned by a comparison operator
with an integral mode and stored by a store-flag instruction
(‘cstoremode4’) when the condition is true. This description must
apply to all the ‘cstoremode4’ patterns and all the
comparison operators whose results have a MODE_INT mode.
A value of 1 or −1 means that the instruction implementing the
comparison operator returns exactly 1 or −1 when the comparison is true
and 0 when the comparison is false. Otherwise, the value indicates
which bits of the result are guaranteed to be 1 when the comparison is
true. This value is interpreted in the mode of the comparison
operation, which is given by the mode of the first operand in the
‘cstoremode4’ pattern. Either the low bit or the sign bit of
STORE_FLAG_VALUE be on. Presently, only those bits are used by
the compiler.
If STORE_FLAG_VALUE is neither 1 or −1, the compiler will
generate code that depends only on the specified bits. It can also
replace comparison operators with equivalent operations if they cause
the required bits to be set, even if the remaining bits are undefined.
For example, on a machine whose comparison operators return an
SImode value and where STORE_FLAG_VALUE is defined as
‘0x80000000’, saying that just the sign bit is relevant, the
expression
(ne:SI (and:SI x (const_int power-of-2)) (const_int 0))
can be converted to
(ashift:SI x (const_int n))
where n is the appropriate shift count to move the bit being tested into the sign bit.
There is no way to describe a machine that always sets the low-order bit for a true value, but does not guarantee the value of any other bits, but we do not know of any machine that has such an instruction. If you are trying to port GCC to such a machine, include an instruction to perform a logical-and of the result with 1 in the pattern for the comparison operators and let us know at [email protected].
Often, a machine will have multiple instructions that obtain a value
from a comparison (or the condition codes). Here are rules to guide the
choice of value for STORE_FLAG_VALUE, and hence the instructions
to be used:
STORE_FLAG_VALUE. It is more efficient for the compiler to
“normalize” the value (convert it to, e.g., 1 or 0) than for the
comparison operators to do so because there may be opportunities to
combine the normalization with other operations.
Many machines can produce both the value chosen for
STORE_FLAG_VALUE and its negation in the same number of
instructions. On those machines, you should also define a pattern for
those cases, e.g., one matching
(set A (neg:m (ne:m B C)))
Some machines can also perform and or plus operations on
condition code values with less instructions than the corresponding
‘cstoremode4’ insn followed by and or plus. On those
machines, define the appropriate patterns. Use the names incscc
and decscc, respectively, for the patterns which perform
plus or minus operations on condition code values. See
rs6000.md for some examples. The GNU Superoptimizer can be used to
find such instruction sequences on other machines.
If this macro is not defined, the default value, 1, is used. You need
not define STORE_FLAG_VALUE if the machine has no store-flag
instructions, or if the value generated by these instructions is 1.
A C expression that gives a nonzero REAL_VALUE_TYPE value that is
returned when comparison operators with floating-point results are true.
Define this macro on machines that have comparison operations that return
floating-point values. If there are no such operations, do not define
this macro.
A C expression that gives an rtx representing the nonzero true element
for vector comparisons. The returned rtx should be valid for the inner
mode of mode which is guaranteed to be a vector mode. Define
this macro on machines that have vector comparison operations that
return a vector result. If there are no such operations, do not define
this macro. Typically, this macro is defined as const1_rtx or
constm1_rtx. This macro may return NULL_RTX to prevent
the compiler optimizing such vector comparison operations for the
given mode.
A C expression that indicates whether the architecture defines a value
for clz or ctz with a zero operand.
A result of 0 indicates the value is undefined.
If the value is defined for only the RTL expression, the macro should
evaluate to 1; if the value applies also to the corresponding optab
entry (which is normally the case if it expands directly into
the corresponding RTL), then the macro should evaluate to 2.
In the cases where the value is defined, value should be set to
this value.
If this macro is not defined, the value of clz or
ctz at zero is assumed to be undefined.
This macro must be defined if the target’s expansion for ffs
relies on a particular value to get correct results. Otherwise it
is not necessary, though it may be used to optimize some corner cases, and
to provide a default expansion for the ffs optab.
Note that regardless of this macro the “definedness” of clz
and ctz at zero do not extend to the builtin functions
visible to the user. Thus one may be free to adjust the value at will
to match the target expansion of these operations without fear of
breaking the API.
An alias for the machine mode for pointers. On most machines, define
this to be the integer mode corresponding to the width of a hardware
pointer; SImode on 32-bit machine or DImode on 64-bit machines.
On some machines you must define this to be one of the partial integer
modes, such as PSImode.
The width of Pmode must be at least as large as the value of
POINTER_SIZE. If it is not equal, you must define the macro
POINTERS_EXTEND_UNSIGNED to specify how pointers are extended
to Pmode.
An alias for the machine mode used for memory references to functions
being called, in call RTL expressions. On most CISC machines,
where an instruction can begin at any byte address, this should be
QImode. On most RISC machines, where all instructions have fixed
size and alignment, this should be a mode with the same size and alignment
as the machine instruction words - typically SImode or HImode.
In normal operation, the preprocessor expands __STDC__ to the
constant 1, to signify that GCC conforms to ISO Standard C. On some
hosts, like Solaris, the system compiler uses a different convention,
where __STDC__ is normally 0, but is 1 if the user specifies
strict conformance to the C Standard.
Defining STDC_0_IN_SYSTEM_HEADERS makes GNU CPP follows the host
convention when processing system header files, but when processing user
files __STDC__ will always expand to 1.
const char * TARGET_C_PREINCLUDE (void) ¶Define this hook to return the name of a header file to be included at
the start of all compilations, as if it had been included with
#include <file>. If this hook returns NULL, or is
not defined, or the header is not found, or if the user specifies
-ffreestanding or -nostdinc, no header is included.
This hook can be used together with a header provided by the system C library to implement ISO C requirements for certain macros to be predefined that describe properties of the whole implementation rather than just the compiler.
bool TARGET_CXX_IMPLICIT_EXTERN_C (const char*) ¶Define this hook to add target-specific C++ implicit extern C functions. If this function returns true for the name of a file-scope function, that function implicitly gets extern "C" linkage rather than whatever language linkage the declaration would normally have. An example of such function is WinMain on Win32 targets.
Define this macro if the system header files do not support C++. This macro handles system header files by pretending that system header files are enclosed in ‘extern "C" {…}’.
Define this macro if you want to implement any target-specific pragmas.
If defined, it is a C expression which makes a series of calls to
c_register_pragma or c_register_pragma_with_expansion
for each pragma. The macro may also do any
setup required for the pragmas.
The primary reason to define this macro is to provide compatibility with other compilers for the same target. In general, we discourage definition of target-specific pragmas for GCC.
If the pragma can be implemented by attributes then you should consider defining the target hook ‘TARGET_INSERT_ATTRIBUTES’ as well.
Preprocessor macros that appear on pragma lines are not expanded. All ‘#pragma’ directives that do not match any registered pragma are silently ignored, unless the user specifies -Wunknown-pragmas.
void c_register_pragma (const char *space, const char *name, void (*callback) (struct cpp_reader *)) ¶void c_register_pragma_with_expansion (const char *space, const char *name, void (*callback) (struct cpp_reader *)) ¶Each call to c_register_pragma or
c_register_pragma_with_expansion establishes one pragma. The
callback routine will be called when the preprocessor encounters a
pragma of the form
#pragma [space] name …
space is the case-sensitive namespace of the pragma, or
NULL to put the pragma in the global namespace. The callback
routine receives pfile as its first argument, which can be passed
on to cpplib’s functions if necessary. You can lex tokens after the
name by calling pragma_lex. Tokens that are not read by the
callback will be silently ignored. The end of the line is indicated by
a token of type CPP_EOF. Macro expansion occurs on the
arguments of pragmas registered with
c_register_pragma_with_expansion but not on the arguments of
pragmas registered with c_register_pragma.
Note that the use of pragma_lex is specific to the C and C++
compilers. It will not work in the Java or Fortran compilers, or any
other language compilers for that matter. Thus if pragma_lex is going
to be called from target-specific code, it must only be done so when
building the C and C++ compilers. This can be done by defining the
variables c_target_objs and cxx_target_objs in the
target entry in the config.gcc file. These variables should name
the target-specific, language-specific object file which contains the
code that uses pragma_lex. Note it will also be necessary to add a
rule to the makefile fragment pointed to by tmake_file that shows
how to build this object file.
Define this macro if macros should be expanded in the arguments of ‘#pragma pack’.
If your target requires a structure packing default other than 0 (meaning the machine default), define this macro to the necessary value (in bytes). This must be a value that would also be valid to use with ‘#pragma pack()’ (that is, a small power of two).
Define this macro to control use of the character ‘$’ in identifier names for the C family of languages. 0 means ‘$’ is not allowed by default; 1 means it is allowed. 1 is the default; there is no need to define this macro in that case.
Define this macro as a C expression that is nonzero if it is safe for the
delay slot scheduler to place instructions in the delay slot of insn,
even if they appear to use a resource set or clobbered in insn.
insn is always a jump_insn or an insn; GCC knows that
every call_insn has this behavior. On machines where some insn
or jump_insn is really a function call and hence has this behavior,
you should define this macro.
You need not define this macro if it would always return zero.
Define this macro as a C expression that is nonzero if it is safe for the
delay slot scheduler to place instructions in the delay slot of insn,
even if they appear to set or clobber a resource referenced in insn.
insn is always a jump_insn or an insn. On machines where
some insn or jump_insn is really a function call and its operands
are registers whose use is actually in the subroutine it calls, you should
define this macro. Doing so allows the delay slot scheduler to move
instructions which copy arguments into the argument registers into the delay
slot of insn.
You need not define this macro if it would always return zero.
Define this macro as a C expression that is nonzero if, in some cases, global symbols from one translation unit may not be bound to undefined symbols in another translation unit without user intervention. For instance, under Microsoft Windows symbols must be explicitly imported from shared libraries (DLLs).
You need not define this macro if it would always evaluate to zero.
rtx_insn * TARGET_MD_ASM_ADJUST (vec<rtx>& outputs, vec<rtx>& inputs, vec<machine_mode>& input_modes, vec<const char *>& constraints, vec<rtx>& clobbers, HARD_REG_SET& clobbered_regs, location_t loc) ¶This target hook may add clobbers to clobbers and clobbered_regs for any hard regs the port wishes to automatically clobber for an asm. The outputs and inputs may be inspected to avoid clobbering a register that is already used by the asm. loc is the source location of the asm.
It may modify the outputs, inputs, input_modes, and constraints as necessary for other pre-processing. In this case the return value is a sequence of insns to emit after the asm. Note that changes to inputs must be accompanied by the corresponding changes to input_modes.
Define this macro as a C string constant for the linker argument to link in the system math library, minus the initial ‘"-l"’, or ‘""’ if the target does not have a separate math library.
You need only define this macro if the default of ‘"m"’ is wrong.
Define this macro as a C string constant for the environment variable that specifies where the linker should look for libraries.
You need only define this macro if the default of ‘"LIBRARY_PATH"’ is wrong.
Define this macro if the target supports the following POSIX file
functions, access, mkdir and file locking with fcntl / F_SETLKW.
Defining TARGET_POSIX_IO will enable the test coverage code
to use file locking when exiting a program, which avoids race conditions
if the program has forked. It will also create directories at run-time
for cross-profiling.
A C expression for the maximum number of instructions to execute via
conditional execution instructions instead of a branch. A value of
BRANCH_COST+1 is the default.
Used if the target needs to perform machine-dependent modifications on the
conditionals used for turning basic blocks into conditionally executed code.
ce_info points to a data structure, struct ce_if_block, which
contains information about the currently processed blocks. true_expr
and false_expr are the tests that are used for converting the
then-block and the else-block, respectively. Set either true_expr or
false_expr to a null pointer if the tests cannot be converted.
Like IFCVT_MODIFY_TESTS, but used when converting more complicated
if-statements into conditions combined by and and or operations.
bb contains the basic block that contains the test that is currently
being processed and about to be turned into a condition.
A C expression to modify the PATTERN of an INSN that is to
be converted to conditional execution format. ce_info points to
a data structure, struct ce_if_block, which contains information
about the currently processed blocks.
A C expression to perform any final machine dependent modifications in
converting code to conditional execution. The involved basic blocks
can be found in the struct ce_if_block structure that is pointed
to by ce_info.
A C expression to cancel any machine dependent modifications in
converting code to conditional execution. The involved basic blocks
can be found in the struct ce_if_block structure that is pointed
to by ce_info.
A C expression to initialize any machine specific data for if-conversion
of the if-block in the struct ce_if_block structure that is pointed
to by ce_info.
void TARGET_MACHINE_DEPENDENT_REORG (void) ¶If non-null, this hook performs a target-specific pass over the instruction stream. The compiler will run it at all optimization levels, just before the point at which it normally does delayed-branch scheduling.
The exact purpose of the hook varies from target to target. Some use it to do transformations that are necessary for correctness, such as laying out in-function constant pools or avoiding hardware hazards. Others use it as an opportunity to do some machine-dependent optimizations.
You need not implement the hook if it has nothing to do. The default definition is null.
void TARGET_INIT_BUILTINS (void) ¶Define this hook if you have any machine-specific built-in functions that need to be defined. It should be a function that performs the necessary setup.
Machine specific built-in functions can be useful to expand special machine instructions that would otherwise not normally be generated because they have no equivalent in the source language (for example, SIMD vector instructions or prefetch instructions).
To create a built-in function, call the function
lang_hooks.builtin_function
which is defined by the language front end. You can use any type nodes set
up by build_common_tree_nodes;
only language front ends that use those two functions will call
‘TARGET_INIT_BUILTINS’.
tree TARGET_BUILTIN_DECL (unsigned code, bool initialize_p) ¶Define this hook if you have any machine-specific built-in functions
that need to be defined. It should be a function that returns the
builtin function declaration for the builtin function code code.
If there is no such builtin and it cannot be initialized at this time
if initialize_p is true the function should return NULL_TREE.
If code is out of range the function should return
error_mark_node.
rtx TARGET_EXPAND_BUILTIN (tree exp, rtx target, rtx subtarget, machine_mode mode, int ignore) ¶Expand a call to a machine specific built-in function that was set up by ‘TARGET_INIT_BUILTINS’. exp is the expression for the function call; the result should go to target if that is convenient, and have mode mode if that is convenient. subtarget may be used as the target for computing one of exp’s operands. ignore is nonzero if the value is to be ignored. This function should return the result of the call to the built-in function.
tree TARGET_RESOLVE_OVERLOADED_BUILTIN (unsigned int loc, tree fndecl, void *arglist) ¶Select a replacement for a machine specific built-in function that
was set up by ‘TARGET_INIT_BUILTINS’. This is done
before regular type checking, and so allows the target to
implement a crude form of function overloading. fndecl is the
declaration of the built-in function. arglist is the list of
arguments passed to the built-in function. The result is a
complete expression that implements the operation, usually
another CALL_EXPR.
arglist really has type ‘VEC(tree,gc)*’
bool TARGET_CHECK_BUILTIN_CALL (location_t loc, vec<location_t> arg_loc, tree fndecl, tree orig_fndecl, unsigned int nargs, tree *args) ¶Perform semantic checking on a call to a machine-specific built-in function after its arguments have been constrained to the function signature. Return true if the call is valid, otherwise report an error and return false.
This hook is called after TARGET_RESOLVE_OVERLOADED_BUILTIN.
The call was originally to built-in function orig_fndecl,
but after the optional TARGET_RESOLVE_OVERLOADED_BUILTIN
step is now to built-in function fndecl. loc is the
location of the call and args is an array of function arguments,
of which there are nargs. arg_loc specifies the location
of each argument.
tree TARGET_FOLD_BUILTIN (tree fndecl, int n_args, tree *argp, bool ignore) ¶Fold a call to a machine specific built-in function that was set up by ‘TARGET_INIT_BUILTINS’. fndecl is the declaration of the built-in function. n_args is the number of arguments passed to the function; the arguments themselves are pointed to by argp. The result is another tree, valid for both GIMPLE and GENERIC, containing a simplified expression for the call’s result. If ignore is true the value will be ignored.
bool TARGET_GIMPLE_FOLD_BUILTIN (gimple_stmt_iterator *gsi) ¶Fold a call to a machine specific built-in function that was set up by ‘TARGET_INIT_BUILTINS’. gsi points to the gimple statement holding the function call. Returns true if any change was made to the GIMPLE stream.
int TARGET_COMPARE_VERSION_PRIORITY (tree decl1, tree decl2) ¶This hook is used to compare the target attributes in two functions to determine which function’s features get higher priority. This is used during function multi-versioning to figure out the order in which two versions must be dispatched. A function version with a higher priority is checked for dispatching earlier. decl1 and decl2 are the two function decls that will be compared.
tree TARGET_GET_FUNCTION_VERSIONS_DISPATCHER (void *decl) ¶This hook is used to get the dispatcher function for a set of function versions. The dispatcher function is called to invoke the right function version at run-time. decl is one version from a set of semantically identical versions.
tree TARGET_GENERATE_VERSION_DISPATCHER_BODY (void *arg) ¶This hook is used to generate the dispatcher logic to invoke the right function version at run-time for a given set of function versions. arg points to the callgraph node of the dispatcher function whose body must be generated.
bool TARGET_PREDICT_DOLOOP_P (class loop *loop) ¶Return true if we can predict it is possible to use a low-overhead loop for a particular loop. The parameter loop is a pointer to the loop. This target hook is required only when the target supports low-overhead loops, and will help ivopts to make some decisions. The default version of this hook returns false.
bool TARGET_HAVE_COUNT_REG_DECR_P ¶Return true if the target supports hardware count register for decrement and branch. The default value is false.
int64_t TARGET_DOLOOP_COST_FOR_GENERIC ¶One IV candidate dedicated for doloop is introduced in IVOPTs, we can calculate the computation cost of adopting it to any generic IV use by function get_computation_cost as before. But for targets which have hardware count register support for decrement and branch, it may have to move IV value from hardware count register to general purpose register while doloop IV candidate is used for generic IV uses. It probably takes expensive penalty. This hook allows target owners to define the cost for this especially for generic IV uses. The default value is zero.
int64_t TARGET_DOLOOP_COST_FOR_ADDRESS ¶One IV candidate dedicated for doloop is introduced in IVOPTs, we can calculate the computation cost of adopting it to any address IV use by function get_computation_cost as before. But for targets which have hardware count register support for decrement and branch, it may have to move IV value from hardware count register to general purpose register while doloop IV candidate is used for address IV uses. It probably takes expensive penalty. This hook allows target owners to define the cost for this escpecially for address IV uses. The default value is zero.
bool TARGET_CAN_USE_DOLOOP_P (const widest_int &iterations, const widest_int &iterations_max, unsigned int loop_depth, bool entered_at_top) ¶Return true if it is possible to use low-overhead loops (doloop_end
and doloop_begin) for a particular loop. iterations gives the
exact number of iterations, or 0 if not known. iterations_max gives
the maximum number of iterations, or 0 if not known. loop_depth is
the nesting depth of the loop, with 1 for innermost loops, 2 for loops that
contain innermost loops, and so on. entered_at_top is true if the
loop is only entered from the top.
This hook is only used if doloop_end is available. The default
implementation returns true. You can use can_use_doloop_if_innermost
if the loop must be the innermost, and if there are no other restrictions.
const char * TARGET_INVALID_WITHIN_DOLOOP (const rtx_insn *insn) ¶Take an instruction in insn and return NULL if it is valid within a low-overhead loop, otherwise return a string explaining why doloop could not be applied.
Many targets use special registers for low-overhead looping. For any instruction that clobbers these this function should return a string indicating the reason why the doloop could not be applied. By default, the RTL loop optimizer does not use a present doloop pattern for loops containing function calls or branch on table instructions.
machine_mode TARGET_PREFERRED_DOLOOP_MODE (machine_mode mode) ¶This hook takes a mode for a doloop IV, where mode is the
original mode for the operation. If the target prefers an alternate
mode for the operation, then this hook should return that mode;
otherwise the original mode should be returned. For example, on a
64-bit target, DImode might be preferred over SImode. Both the
original and the returned modes should be MODE_INT.
bool TARGET_LEGITIMATE_COMBINED_INSN (rtx_insn *insn) ¶Take an instruction in insn and return false if the instruction
is not appropriate as a combination of two or more instructions. The
default is to accept all instructions.
bool TARGET_CAN_FOLLOW_JUMP (const rtx_insn *follower, const rtx_insn *followee) ¶FOLLOWER and FOLLOWEE are JUMP_INSN instructions; return true if FOLLOWER may be modified to follow FOLLOWEE; false, if it can’t. For example, on some targets, certain kinds of branches can’t be made to follow through a hot/cold partitioning.
bool TARGET_COMMUTATIVE_P (const_rtx x, int outer_code) ¶This target hook returns true if x is considered to be commutative.
Usually, this is just COMMUTATIVE_P (x), but the HP PA doesn’t consider
PLUS to be commutative inside a MEM. outer_code is the rtx code
of the enclosing rtl, if known, otherwise it is UNKNOWN.
rtx TARGET_ALLOCATE_INITIAL_VALUE (rtx hard_reg) ¶When the initial value of a hard register has been copied in a pseudo
register, it is often not necessary to actually allocate another register
to this pseudo register, because the original hard register or a stack slot
it has been saved into can be used. TARGET_ALLOCATE_INITIAL_VALUE
is called at the start of register allocation once for each hard register
that had its initial value copied by using
get_func_hard_reg_initial_val or get_hard_reg_initial_val.
Possible values are NULL_RTX, if you don’t want
to do any special allocation, a REG rtx—that would typically be
the hard register itself, if it is known not to be clobbered—or a
MEM.
If you are returning a MEM, this is only a hint for the allocator;
it might decide to use another register anyways.
You may use current_function_is_leaf or
REG_N_SETS in the hook to determine if the hard
register in question will not be clobbered.
The default value of this hook is NULL, which disables any special
allocation.
int TARGET_UNSPEC_MAY_TRAP_P (const_rtx x, unsigned flags) ¶This target hook returns nonzero if x, an unspec or
unspec_volatile operation, might cause a trap. Targets can use
this hook to enhance precision of analysis for unspec and
unspec_volatile operations. You may call may_trap_p_1
to analyze inner elements of x in which case flags should be
passed along.
void TARGET_SET_CURRENT_FUNCTION (tree decl) ¶The compiler invokes this hook whenever it changes its current function
context (cfun). You can define this function if
the back end needs to perform any initialization or reset actions on a
per-function basis. For example, it may be used to implement function
attributes that affect register usage or code generation patterns.
The argument decl is the declaration for the new function context,
and may be null to indicate that the compiler has left a function context
and is returning to processing at the top level.
The default hook function does nothing.
GCC sets cfun to a dummy function context during initialization of
some parts of the back end. The hook function is not invoked in this
situation; you need not worry about the hook being invoked recursively,
or when the back end is in a partially-initialized state.
cfun might be NULL to indicate processing at top level,
outside of any function scope.
Define this macro to be a C string representing the suffix for object files on your target machine. If you do not define this macro, GCC will use ‘.o’ as the suffix for object files.
Define this macro to be a C string representing the suffix to be automatically added to executable files on your target machine. If you do not define this macro, GCC will use the null string as the suffix for executable files.
If defined, collect2 will scan the individual object files
specified on its command line and create an export list for the linker.
Define this macro for systems like AIX, where the linker discards
object files that are not referenced from main and uses export
lists.
bool TARGET_CANNOT_MODIFY_JUMPS_P (void) ¶This target hook returns true past the point in which new jump
instructions could be created. On machines that require a register for
every jump such as the SHmedia ISA of SH5, this point would typically be
reload, so this target hook should be defined to a function such as:
static bool
cannot_modify_jumps_past_reload_p ()
{
return (reload_completed || reload_in_progress);
}
bool TARGET_HAVE_CONDITIONAL_EXECUTION (void) ¶This target hook returns true if the target supports conditional execution. This target hook is required only when the target has several different modes and they have different conditional execution capability, such as ARM.
rtx TARGET_GEN_CCMP_FIRST (rtx_insn **prep_seq, rtx_insn **gen_seq, int code, tree op0, tree op1) ¶This function prepares to emit a comparison insn for the first compare in a
sequence of conditional comparisions. It returns an appropriate comparison
with CC for passing to gen_ccmp_next or cbranch_optab.
The insns to prepare the compare are saved in prep_seq and the compare
insns are saved in gen_seq. They will be emitted when all the
compares in the conditional comparision are generated without error.
code is the rtx_code of the compare for op0 and op1.
rtx TARGET_GEN_CCMP_NEXT (rtx_insn **prep_seq, rtx_insn **gen_seq, rtx prev, int cmp_code, tree op0, tree op1, int bit_code) ¶This function prepares to emit a conditional comparison within a sequence
of conditional comparisons. It returns an appropriate comparison with
CC for passing to gen_ccmp_next or cbranch_optab.
The insns to prepare the compare are saved in prep_seq and the compare
insns are saved in gen_seq. They will be emitted when all the
compares in the conditional comparision are generated without error. The
prev expression is the result of a prior call to gen_ccmp_first
or gen_ccmp_next. It may return NULL if the combination of
prev and this comparison is not supported, otherwise the result must
be appropriate for passing to gen_ccmp_next or cbranch_optab.
code is the rtx_code of the compare for op0 and op1.
bit_code is AND or IOR, which is the op on the compares.
rtx TARGET_GEN_MEMSET_SCRATCH_RTX (machine_mode mode) ¶This hook should return an rtx for a scratch register in mode to
be used when expanding memset calls. The backend can use a hard scratch
register to avoid stack realignment when expanding memset. The default
is gen_reg_rtx.
unsigned TARGET_LOOP_UNROLL_ADJUST (unsigned nunroll, class loop *loop) ¶This target hook returns a new value for the number of times loop should be unrolled. The parameter nunroll is the number of times the loop is to be unrolled. The parameter loop is a pointer to the loop, which is going to be checked for unrolling. This target hook is required only when the target has special constraints like maximum number of memory accesses.
If defined, this macro is interpreted as a signed integer C expression
that specifies the maximum number of floating point multiplications
that should be emitted when expanding exponentiation by an integer
constant inline. When this value is defined, exponentiation requiring
more than this number of multiplications is implemented by calling the
system library’s pow, powf or powl routines.
The default value places no upper bound on the multiplication count.
void TARGET_EXTRA_INCLUDES (const char *sysroot, const char *iprefix, int stdinc) ¶This target hook should register any extra include files for the target. The parameter stdinc indicates if normal include files are present. The parameter sysroot is the system root directory. The parameter iprefix is the prefix for the gcc directory.
void TARGET_EXTRA_PRE_INCLUDES (const char *sysroot, const char *iprefix, int stdinc) ¶This target hook should register any extra include files for the target before any standard headers. The parameter stdinc indicates if normal include files are present. The parameter sysroot is the system root directory. The parameter iprefix is the prefix for the gcc directory.
void TARGET_OPTF (char *path) ¶This target hook should register special include paths for the target. The parameter path is the include to register. On Darwin systems, this is used for Framework includes, which have semantics that are different from -I.
This target macro returns true if it is safe to use a local alias
for a virtual function fndecl when constructing thunks,
false otherwise. By default, the macro returns true for all
functions, if a target supports aliases (i.e. defines
ASM_OUTPUT_DEF), false otherwise,
If defined, this macro is the name of a global variable containing target-specific format checking information for the -Wformat option. The default is to have no target-specific format checks.
If defined, this macro is the number of entries in
TARGET_FORMAT_TYPES.
If defined, this macro is the name of a global variable containing
target-specific format overrides for the -Wformat option. The
default is to have no target-specific format overrides. If defined,
TARGET_FORMAT_TYPES must be defined, too.
If defined, this macro specifies the number of entries in
TARGET_OVERRIDES_FORMAT_ATTRIBUTES.
If defined, this macro specifies the optional initialization routine for target specific customizations of the system printf and scanf formatter settings.
const char * TARGET_INVALID_ARG_FOR_UNPROTOTYPED_FN (const_tree typelist, const_tree funcdecl, const_tree val) ¶If defined, this macro returns the diagnostic message when it is illegal to pass argument val to function funcdecl with prototype typelist.
const char * TARGET_INVALID_CONVERSION (const_tree fromtype, const_tree totype) ¶If defined, this macro returns the diagnostic message when it is
invalid to convert from fromtype to totype, or NULL
if validity should be determined by the front end.
const char * TARGET_INVALID_UNARY_OP (int op, const_tree type) ¶If defined, this macro returns the diagnostic message when it is
invalid to apply operation op (where unary plus is denoted by
CONVERT_EXPR) to an operand of type type, or NULL
if validity should be determined by the front end.
const char * TARGET_INVALID_BINARY_OP (int op, const_tree type1, const_tree type2) ¶If defined, this macro returns the diagnostic message when it is
invalid to apply operation op to operands of types type1
and type2, or NULL if validity should be determined by
the front end.
tree TARGET_PROMOTED_TYPE (const_tree type) ¶If defined, this target hook returns the type to which values of
type should be promoted when they appear in expressions,
analogous to the integer promotions, or NULL_TREE to use the
front end’s normal promotion rules. This hook is useful when there are
target-specific types with special promotion rules.
This is currently used only by the C and C++ front ends.
tree TARGET_CONVERT_TO_TYPE (tree type, tree expr) ¶If defined, this hook returns the result of converting expr to
type. It should return the converted expression,
or NULL_TREE to apply the front end’s normal conversion rules.
This hook is useful when there are target-specific types with special
conversion rules.
This is currently used only by the C and C++ front ends.
bool TARGET_VERIFY_TYPE_CONTEXT (location_t loc, type_context_kind context, const_tree type, bool silent_p) ¶If defined, this hook returns false if there is a target-specific reason why type type cannot be used in the source language context described by context. When silent_p is false, the hook also reports an error against loc for invalid uses of type.
Calls to this hook should be made through the global function
verify_type_context, which makes the silent_p parameter
default to false and also handles error_mark_node.
The default implementation always returns true.
This macro determines the size of the objective C jump buffer for the NeXT runtime. By default, OBJC_JBLEN is defined to an innocuous value.
Define this macro if any target-specific attributes need to be attached to the functions in libgcc that provide low-level support for call stack unwinding. It is used in declarations in unwind-generic.h and the associated definitions of those functions.
void TARGET_UPDATE_STACK_BOUNDARY (void) ¶Define this macro to update the current function stack boundary if necessary.
rtx TARGET_GET_DRAP_RTX (void) ¶This hook should return an rtx for Dynamic Realign Argument Pointer (DRAP) if a
different argument pointer register is needed to access the function’s
argument list due to stack realignment. Return NULL if no DRAP
is needed.
HARD_REG_SET TARGET_ZERO_CALL_USED_REGS (HARD_REG_SET selected_regs) ¶This target hook emits instructions to zero the subset of selected_regs that could conceivably contain values that are useful to an attacker. Return the set of registers that were actually cleared.
For most targets, the returned set of registers is a subset of selected_regs, however, for some of the targets (for example MIPS), clearing some registers that are in the selected_regs requires clearing other call used registers that are not in the selected_regs, under such situation, the returned set of registers must be a subset of all call used registers.
The default implementation uses normal move instructions to zero all the registers in selected_regs. Define this hook if the target has more efficient ways of zeroing certain registers, or if you believe that certain registers would never contain values that are useful to an attacker.
bool TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS (void) ¶When optimization is disabled, this hook indicates whether or not
arguments should be allocated to stack slots. Normally, GCC allocates
stacks slots for arguments when not optimizing in order to make
debugging easier. However, when a function is declared with
__attribute__((naked)), there is no stack frame, and the compiler
cannot safely move arguments from the registers in which they are passed
to the stack. Therefore, this hook should return true in general, but
false for naked functions. The default implementation always returns true.
unsigned HOST_WIDE_INT TARGET_CONST_ANCHOR ¶On some architectures it can take multiple instructions to synthesize
a constant. If there is another constant already in a register that
is close enough in value then it is preferable that the new constant
is computed from this register using immediate addition or
subtraction. We accomplish this through CSE. Besides the value of
the constant we also add a lower and an upper constant anchor to the
available expressions. These are then queried when encountering new
constants. The anchors are computed by rounding the constant up and
down to a multiple of the value of TARGET_CONST_ANCHOR.
TARGET_CONST_ANCHOR should be the maximum positive value
accepted by immediate-add plus one. We currently assume that the
value of TARGET_CONST_ANCHOR is a power of 2. For example, on
MIPS, where add-immediate takes a 16-bit signed value,
TARGET_CONST_ANCHOR is set to ‘0x8000’. The default value
is zero, which disables this optimization.
unsigned HOST_WIDE_INT TARGET_ASAN_SHADOW_OFFSET (void) ¶Return the offset bitwise ored into shifted address to get corresponding Address Sanitizer shadow memory address. NULL if Address Sanitizer is not supported by the target. May return 0 if Address Sanitizer is not supported by a subtarget.
unsigned HOST_WIDE_INT TARGET_MEMMODEL_CHECK (unsigned HOST_WIDE_INT val) ¶Validate target specific memory model mask bits. When NULL no target specific memory model bits are allowed.
unsigned char TARGET_ATOMIC_TEST_AND_SET_TRUEVAL ¶This value should be set if the result written by
atomic_test_and_set is not exactly 1, i.e. the
bool true.
bool TARGET_HAS_IFUNC_P (void) ¶It returns true if the target supports GNU indirect functions. The support includes the assembler, linker and dynamic linker. The default value of this hook is based on target’s libc.
bool TARGET_IFUNC_REF_LOCAL_OK (void) ¶Return true if it is OK to reference indirect function resolvers locally. The default is to return false.
unsigned int TARGET_ATOMIC_ALIGN_FOR_MODE (machine_mode mode) ¶If defined, this function returns an appropriate alignment in bits for an atomic object of machine_mode mode. If 0 is returned then the default alignment for the specified mode is used.
void TARGET_ATOMIC_ASSIGN_EXPAND_FENV (tree *hold, tree *clear, tree *update) ¶ISO C11 requires atomic compound assignments that may raise floating-point
exceptions to raise exceptions corresponding to the arithmetic operation
whose result was successfully stored in a compare-and-exchange sequence.
This requires code equivalent to calls to feholdexcept,
feclearexcept and feupdateenv to be generated at
appropriate points in the compare-and-exchange sequence. This hook should
set *hold to an expression equivalent to the call to
feholdexcept, *clear to an expression equivalent to
the call to feclearexcept and *update to an expression
equivalent to the call to feupdateenv. The three expressions are
NULL_TREE on entry to the hook and may be left as NULL_TREE
if no code is required in a particular place. The default implementation
leaves all three expressions as NULL_TREE. The
__atomic_feraiseexcept function from libatomic may be of use
as part of the code generated in *update.
void TARGET_RECORD_OFFLOAD_SYMBOL (tree) ¶Used when offloaded functions are seen in the compilation unit and no named sections are available. It is called once for each symbol that must be recorded in the offload function and variable table.
char * TARGET_OFFLOAD_OPTIONS (void) ¶Used when writing out the list of options into an LTO file. It should translate any relevant target-specific options (such as the ABI in use) into one of the -foffload options that exist as a common interface to express such options. It should return a string containing these options, separated by spaces, which the caller will free.
On older ports, large integers are stored in CONST_DOUBLE rtl
objects. Newer ports define TARGET_SUPPORTS_WIDE_INT to be nonzero
to indicate that large integers are stored in
CONST_WIDE_INT rtl objects. The CONST_WIDE_INT allows
very large integer constants to be represented. CONST_DOUBLE
is limited to twice the size of the host’s HOST_WIDE_INT
representation.
Converting a port mostly requires looking for the places where
CONST_DOUBLEs are used with VOIDmode and replacing that
code with code that accesses CONST_WIDE_INTs. ‘"grep -i
const_double"’ at the port level gets you to 95% of the changes that
need to be made. There are a few places that require a deeper look.
hval and lval for
CONST_WIDE_INTs. This would be difficult to express in the md
language since there are a variable number of elements.
Most ports only check that hval is either 0 or -1 to see if the
value is small. As mentioned above, this will no longer be necessary
since small constants are always CONST_INT. Of course there
are still a few exceptions, the alpha’s constraint used by the zap
instruction certainly requires careful examination by C code.
However, all the current code does is pass the hval and lval to C
code, so evolving the c code to look at the CONST_WIDE_INT is
not really a large change.
CONST_WIDE_INT.
All and all it does not take long to convert ports that the maintainer is familiar with.
bool TARGET_HAVE_SPECULATION_SAFE_VALUE (bool active) ¶This hook is used to determine the level of target support for
__builtin_speculation_safe_value. If called with an argument
of false, it returns true if the target has been modified to support
this builtin. If called with an argument of true, it returns true
if the target requires active mitigation execution might be speculative.
The default implementation returns false if the target does not define
a pattern named speculation_barrier. Else it returns true
for the first case and whether the pattern is enabled for the current
compilation for the second case.
For targets that have no processors that can execute instructions
speculatively an alternative implemenation of this hook is available:
simply redefine this hook to speculation_safe_value_not_needed
along with your other target hooks.
rtx TARGET_SPECULATION_SAFE_VALUE (machine_mode mode, rtx result, rtx val, rtx failval) ¶This target hook can be used to generate a target-specific code
sequence that implements the __builtin_speculation_safe_value
built-in function. The function must always return val in
result in mode mode when the cpu is not executing
speculatively, but must never return that when speculating until it
is known that the speculation will not be unwound. The hook supports
two primary mechanisms for implementing the requirements. The first
is to emit a speculation barrier which forces the processor to wait
until all prior speculative operations have been resolved; the second
is to use a target-specific mechanism that can track the speculation
state and to return failval if it can determine that
speculation must be unwound at a later time.
The default implementation simply copies val to result and
emits a speculation_barrier instruction if that is defined.
void TARGET_RUN_TARGET_SELFTESTS (void) ¶If selftests are enabled, run any selftests for this target.
bool TARGET_MEMTAG_CAN_TAG_ADDRESSES () ¶True if the backend architecture naturally supports ignoring some region of pointers. This feature means that -fsanitize=hwaddress can work.
At preset, this feature does not support address spaces. It also requires
Pmode to be the same as ptr_mode.
uint8_t TARGET_MEMTAG_TAG_SIZE () ¶Return the size of a tag (in bits) for this platform.
The default returns 8.
uint8_t TARGET_MEMTAG_GRANULE_SIZE () ¶Return the size in real memory that each byte in shadow memory refers to. I.e. if a variable is X bytes long in memory, then this hook should return the value Y such that the tag in shadow memory spans X/Y bytes.
Most variables will need to be aligned to this amount since two variables that are neighbors in memory and share a tag granule would need to share the same tag.
The default returns 16.
rtx TARGET_MEMTAG_INSERT_RANDOM_TAG (rtx untagged, rtx target) ¶Return an RTX representing the value of untagged but with a (possibly) random tag in it. Put that value into target if it is convenient to do so. This function is used to generate a tagged base for the current stack frame.
rtx TARGET_MEMTAG_ADD_TAG (rtx base, poly_int64 addr_offset, uint8_t tag_offset) ¶Return an RTX that represents the result of adding addr_offset to
the address in pointer base and tag_offset to the tag in pointer
base.
The resulting RTX must either be a valid memory address or be able to get
put into an operand with force_operand.
Unlike other memtag hooks, this must return an expression and not emit any RTL.
rtx TARGET_MEMTAG_SET_TAG (rtx untagged_base, rtx tag, rtx target) ¶Return an RTX representing untagged_base but with the tag tag. Try and store this in target if convenient. untagged_base is required to have a zero tag when this hook is called. The default of this hook is to set the top byte of untagged_base to tag.
rtx TARGET_MEMTAG_EXTRACT_TAG (rtx tagged_pointer, rtx target) ¶Return an RTX representing the tag stored in tagged_pointer. Store the result in target if it is convenient. The default represents the top byte of the original pointer.
rtx TARGET_MEMTAG_UNTAGGED_POINTER (rtx tagged_pointer, rtx target) ¶Return an RTX representing tagged_pointer with its tag set to zero. Store the result in target if convenient. The default clears the top byte of the original pointer.
HOST_WIDE_INT TARGET_GCOV_TYPE_SIZE (void) ¶Returns the gcov type size in bits. This type is used for example for counters incremented by profiling and code-coverage events. The default value is 64, if the type size of long long is greater than 32, otherwise the default value is 32. A 64-bit type is recommended to avoid overflows of the counters. If the -fprofile-update=atomic is used, then the counters are incremented using atomic operations. Targets not supporting 64-bit atomic operations may override the default value and request a 32-bit type.
bool TARGET_HAVE_SHADOW_CALL_STACK ¶This value is true if the target platform supports -fsanitize=shadow-call-stack. The default value is false.